README.md

How to run Playwright tests locally

Setting up the environment:

There are two ways of running Playwright tests on your local machine:

Running Playwright tests with Docker:

1. Install Docker

If you don't have Docker, you need to install it to be able to continue with this guide. You can install it from here.

2. Set up the Docker instance

To set it up for the first time, please run this command into the root folder:

bash bin/envs/init.sh

It will create the initial Docker setup according to the same docker-compose file that runs on the CI pipeline.

3. Load the environment

To load the sample-data environment you need to run this command:

docker-compose -f docker-compose.ci.yml run --rm -u root cli sh "/var/www/html/bin/envs/sample-data/start.sh"

Currently, we only migrated the customizer tests for which you need the sample-data environment. As we develop more tests, you'll need to load different environments.

4. Run the Playwright tests

To run the Playwright tests, run the following command from the root folder:

yarn run test:playwright

---

Running Playwright tests on your chosen environment:

For an accurate result, we recommend running those tests on a fresh WordPress install. To reset your WordPress instance, you can run wp db reset --yes from the root directory of your project.

1. Install wp-cli on your local machine

If you don't have WP CLI, you need to install it. Please follow this guide to install WP CLI.

2. Load the environment

Assuming that your local url is https://neve.test you can run the following command from the root folder to set up the sample-data environment:

BASE_URL=https://neve.test bash bin/envs/local.sh sample-data

Currently, we only migrated the customizer tests for which you need the sample-data environment. As we develop more tests, you'll need to load different environments.

3. Run the Playwright tests

Assuming that your local url is https://neve.test, navigate to e2e-tests folder and run the following command:

baseURL=https://neve.test npx playwright test

To run a specific test you can run the following command:

baseURL=https://neve.test npx playwright test path/to/your/file.spec.ts