diff --git a/src/common/m_checker_common.fpp b/src/common/m_checker_common.fpp
index 1c6b7741d..c8a6fa33e 100644
--- a/src/common/m_checker_common.fpp
+++ b/src/common/m_checker_common.fpp
@@ -194,7 +194,7 @@ contains
     !> Checks constraints regarding WENO order.
         !! Called by s_check_inputs_common for all three stages
     subroutine s_check_inputs_weno
-        @:PROHIBIT(all(weno_order /= (/1, 3, 5, 7/)), "weno_order must be 1, 3, or 5")
+        @:PROHIBIT(all(weno_order /= (/1, 3, 5, 7/)), "weno_order must be 1, 3, 5, or 7")
         @:PROHIBIT(m + 1 < weno_order, "m must be at least weno_order - 1")
         @:PROHIBIT(n > 0 .and. n + 1 < weno_order, "n must be at least weno_order - 1")
         @:PROHIBIT(p > 0 .and. p + 1 < weno_order, "p must be at least weno_order - 1")
diff --git a/src/simulation/m_global_parameters.fpp b/src/simulation/m_global_parameters.fpp
index a085e6ca1..7ccfc151f 100644
--- a/src/simulation/m_global_parameters.fpp
+++ b/src/simulation/m_global_parameters.fpp
@@ -135,6 +135,8 @@ module m_global_parameters
         logical, parameter :: mapped_weno = (${mapped_weno}$ /= 0)  !< WENO-M (WENO with mapping of nonlinear weights)
         logical, parameter :: wenoz = (${wenoz}$ /= 0)              !< WENO-Z
         logical, parameter :: teno = (${teno}$ /= 0)                !< TENO (Targeted ENO)
+        real(kind(0d0)), parameter :: wenoz_q = ${wenoz_q}$         !< Power constant for WENO-Z
+        real(kind(0d0)), parameter :: teno_CT = ${teno_CT}$         !< Smoothness threshold for TENO
     #:else
         integer :: weno_polyn     !< Degree of the WENO polynomials (polyn)
         integer :: weno_order     !< Order of the WENO reconstruction
@@ -144,11 +146,11 @@ module m_global_parameters
         logical :: mapped_weno    !< WENO-M (WENO with mapping of nonlinear weights)
         logical :: wenoz          !< WENO-Z
         logical :: teno           !< TENO (Targeted ENO)
+        real(kind(0d0)) :: wenoz_q  !< Power constant for WENO-Z
+        real(kind(0d0)) :: teno_CT  !< Smoothness threshold for TENO
     #:endif
 
     real(kind(0d0)) :: weno_eps       !< Binding for the WENO nonlinear weights
-    real(kind(0d0)) :: teno_CT        !< Smoothness threshold for TENO
-    real(kind(0d0)) :: wenoz_q        !< Power constant for WENO-Z
     logical :: mp_weno        !< Monotonicity preserving (MP) WENO
     logical :: weno_avg       ! Average left/right cell-boundary states
     logical :: weno_Re_flux   !< WENO reconstruct velocity gradients for viscous stress tensor
@@ -177,10 +179,10 @@ module m_global_parameters
     integer :: cpu_start, cpu_end, cpu_rate
 
     #:if not MFC_CASE_OPTIMIZATION
-        !$acc declare create(num_dims, weno_polyn, weno_order, weno_num_stencils, num_fluids, wenojs, mapped_weno, wenoz, teno)
+        !$acc declare create(num_dims, weno_polyn, weno_order, weno_num_stencils, num_fluids, wenojs, mapped_weno, wenoz, teno, wenoz_q, teno_CT)
     #:endif
 
-    !$acc declare create(mpp_lim, model_eqns, mixture_err, alt_soundspeed, avg_state, mp_weno, weno_eps, teno_CT, wenoz_q, hypoelasticity, low_Mach)
+    !$acc declare create(mpp_lim, model_eqns, mixture_err, alt_soundspeed, avg_state, mp_weno, weno_eps, hypoelasticity, low_Mach)
 
     logical :: relax          !< activate phase change
     integer :: relax_model    !< Relaxation model
@@ -527,8 +529,6 @@ contains
         mpp_lim = .false.
         time_stepper = dflt_int
         weno_eps = dflt_real
-        teno_CT = dflt_real
-        wenoz_q = dflt_real
         mp_weno = .false.
         weno_avg = .false.
         weno_Re_flux = .false.
@@ -555,6 +555,8 @@ contains
             mapped_weno = .false.
             wenoz = .false.
             teno = .false.
+            teno_CT = dflt_real
+            wenoz_q = dflt_real
         #:endif
 
         chem_params%advection = .false.
@@ -1109,10 +1111,11 @@ contains
         !$acc update device(cfl_target, m, n, p)
 
         !$acc update device(alt_soundspeed, acoustic_source, num_source)
-        !$acc update device(dt, sys_size, buff_size, pref, rhoref, gamma_idx, pi_inf_idx, E_idx, alf_idx, stress_idx, mpp_lim, bubbles, hypoelasticity, alt_soundspeed, avg_state, num_fluids, model_eqns, num_dims, mixture_err, grid_geometry, cyl_coord, mp_weno, weno_eps, teno_CT, wenoz_q, low_Mach)
+        !$acc update device(dt, sys_size, buff_size, pref, rhoref, gamma_idx, pi_inf_idx, E_idx, alf_idx, stress_idx, mpp_lim, bubbles, hypoelasticity, alt_soundspeed, avg_state, num_fluids, model_eqns, num_dims, mixture_err, grid_geometry, cyl_coord, mp_weno, weno_eps, low_Mach)
 
         #:if not MFC_CASE_OPTIMIZATION
             !$acc update device(wenojs, mapped_weno, wenoz, teno)
+            !$acc update device(teno_CT, wenoz_q)
         #:endif
 
         !$acc enter data copyin(nb, R0ref, Ca, Web, Re_inv, weight, R0, V0, bubbles, polytropic, polydisperse, qbmm, R0_type, ptil, bubble_model, thermal, poly_sigma)
diff --git a/src/simulation/m_start_up.fpp b/src/simulation/m_start_up.fpp
index a23168bf2..5859fde8b 100644
--- a/src/simulation/m_start_up.fpp
+++ b/src/simulation/m_start_up.fpp
@@ -136,7 +136,7 @@ contains
             t_step_start, t_step_stop, t_step_save, t_step_print, &
             model_eqns, mpp_lim, time_stepper, weno_eps, weno_flat, &
             riemann_flat, rdma_mpi, cu_tensor, &
-            teno_CT, wenoz_q, mp_weno, weno_avg, &
+            mp_weno, weno_avg, &
             riemann_solver, low_Mach, wave_speeds, avg_state, &
             bc_x, bc_y, bc_z, &
             x_domain, y_domain, z_domain, &
@@ -149,7 +149,7 @@ contains
             rhoref, pref, bubbles, bubble_model, &
             R0ref, chem_params, &
 #:if not MFC_CASE_OPTIMIZATION
-            nb, mapped_weno, wenoz, teno, weno_order, num_fluids, &
+            nb, mapped_weno, wenoz, teno, teno_CT, wenoz_q, weno_order, num_fluids, &
 #:endif
             Ca, Web, Re_inv, &
             acoustic_source, acoustic, num_source, &
diff --git a/toolchain/mfc/case.py b/toolchain/mfc/case.py
index efc1572d5..30aa0decb 100644
--- a/toolchain/mfc/case.py
+++ b/toolchain/mfc/case.py
@@ -199,6 +199,7 @@ def __get_sim_fpp(self, print: bool) -> str:
             else:
                 weno_num_stencils = weno_polyn
 
+            # Throw error if wenoz_q or teno_CT are required but not set
             return f"""\
 #:set MFC_CASE_OPTIMIZATION = {ARG("case_optimization")}
 #:set weno_order            = {weno_order}
@@ -212,6 +213,8 @@ def __get_sim_fpp(self, print: bool) -> str:
 #:set mapped_weno           = {mapped_weno}
 #:set wenoz                 = {wenoz}
 #:set teno                  = {teno}
+#:set wenoz_q               = {int(self.params.get("wenoz_q", -1))}
+#:set teno_CT               = {self.params.get("teno_CT", -1.0)}
 """
 
         return """\
diff --git a/toolchain/mfc/run/case_dicts.py b/toolchain/mfc/run/case_dicts.py
index 9b9a922f7..5289bf608 100644
--- a/toolchain/mfc/run/case_dicts.py
+++ b/toolchain/mfc/run/case_dicts.py
@@ -361,7 +361,7 @@ def analytic(self):
 ALL.update(SIMULATION)
 ALL.update(POST_PROCESS)
 
-CASE_OPTIMIZATION = [ "mapped_weno", "wenoz", "teno", "nb", "weno_order", "num_fluids" ]
+CASE_OPTIMIZATION = [ "mapped_weno", "wenoz", "teno", "wenoz_q", "teno_CT", "nb", "weno_order", "num_fluids" ]
 
 _properties = { k: v.value for k, v in ALL.items() }