Releases: post-kerbin-mining-corporation/NearFutureElectrical
Releases · post-kerbin-mining-corporation/NearFutureElectrical
NearFutureElectrical 2.0.1
- Fixed an issue where thermal output was not specified in the right context in configs, leading to low outputs
- Fixed a CTT patch issue that I THOUGHT was in the main release
NearFutureElectrical 2.0.0
- Updated ModuleManager to 4.2.3
- Updated B9PartSwitch to 2.20.0
- Updated DynamicBatteryStorage to 2.3.3
- ALL PREVIOUS reactor, processing and fuel parts have been soft-deprecated. They will be deleted in < 10 years
- Switched mod to SystemHeat backend:
- New reactor parts run on the SystemHeat reactor model, which is very similar but uses a different heat system
- SystemHeat is now bundled (0.7.4)
- Adjusted overall balance paradigm for nuclear parts (only applies to new parts)
- Reactors now have ~25y idle life
- Minimum reactor throttle reduced from 25 to 10%
- Reactor thermal efficiency tweaked; now caps out at ~37% and maps to the approximate conversion technology
- Power-mass ratios are tuned to range from 190 to 300 EC/t
- New/revised parts
- MN-1 'SNAK' Fission Reactor : new micro 5 Ec/s reactor with 0.625m partswitch option
- MN-2 'Kerbopower' Fission Reactor: new micro 10 Ec/s reactor with 0.625m partswitch option
- MX-0 'Toaster' Fission Reactor: revised 0.625m, 60 Ec/s reactor with inline and compact partswitch options
- MX-1 'Garnet' Fission Reactor: revised 1.25m, 200 Ec/s reactor with inline and compact partswitch options
- MX-1B 'Prometheus' Fission Reactor: new 1.875m, 800 Ec/s reactor with inline and compact partswitch options
- MX-2C 'Hyperion' Fission Reactor: revised 2.5m, 2000 Ec/s reactor with inline and compact partswitch options
- MX-2L 'Excalibur' Fission Reactor: revised 2.5m, 2000 Ec/s reactor with inline and compact partswitch options
- MX-3L 'Hermes' Fission Reactor: revised 3.75m, 2000 Ec/s reactor with inline and compact partswitch options
- PB-SRG Advanced Radioisotope Generator: evolutionary PB-NUK-III with similar mass ratios but much better costs
- PB-NUK-II Radioisotope Generator: 2 scaled up PB-NUK with ~10% bonus on ratios
- PB-NUK-III Radioisotope Generator: evolutionary PB-NUK with ~10% bonus on ratios
- PB-ACK Radioisotope Generator: small entry level RTG with lower power generation than the stock one. Appears at 1 lower tech level
NearFutureElectrical 1.2.3
- KSP 1.12
- Updated B9PartSwitch to 2.18.0
- Updated DynamicBatteryStorage to 2.2.4
- RadioisotopeGenerator and FissionGenerator modules now count for contract objective completion
NearFutureElectrical 1.2.2
- Updated DynamicBatteryStorage to 2.2.2
- Reverted some USI patch changes
- RTG half life is now calculated correctly for other star systems, config value is specifically in Kerbin years.
- Reactor life display is now calculated correctly for other star systems
- Some code cleanup
NearFutureElectrical 1.2.1
- Fix for inventory parts in 1.10
NearFutureElectrical 1.2.0
- KSP 1.11
- Updated DynamicBatteryStorage to 2.2.1
- Updated CRP to 1.4.2
- Set many parts as usable in inventories roughly following stock model: most 0.625m parts, smaller 1.25m parts
NearFutureElectrical 1.1.3
- KSP 1.10
- Updated B9PartSwitch to 2.17.0
- Updated DynamicBatteryStorage to 2.1.7
- Updated ModuleManager to 4.1.4
- Updated CRP to 1.3.0 (Really this time)
NearFutureElectrical 1.1.2
- Updated B9PartSwitch to 2.16.0
- Updated DynamicBatteryStorage to 2.1.6
- Updated USI compatibility patch
NearFutureElectrical 1.1.1
- Marked for KSP 1.9
- Updated B9PartSwitch to 2.13.0
- Updated DynamicBatteryStorage to 2.1.5
- Updated ModuleManager to 4.1.3
- Updated Russian localization (Sool3)
- Updated Simplified Chinese localization (tinygrox)
NearFutureElectrical 1.1.0
- KSP 1.8
- Rebuild with .NET 4.5
- Updated B9PartSwitch to 2.12.1
- Updated DynamicBatteryStorage to 2.1.0
- Updated ModuleManager to 4.1.0
- Updated CRP to 1.3.0
- DEPRECATED OLD 3.75m BATTERY
- Fixed another case where the stock heat catchup system was not being correctly intercepted on load for reactors.
- Updated all patches to use correct MM patch pass specifier