Skip to content

Latest commit

 

History

History
10 lines (8 loc) · 976 Bytes

README.md

File metadata and controls

10 lines (8 loc) · 976 Bytes
Raw

Introduction

This repository is for reproducing my stackoverflow question.

How to reproduce

All the related code is in the error_reproduce.ipynb. To reproduce the error, you just need to open the Drake Visualizer first and then run the cells in error_reproduce.ipynb in sequence.

Other things

  • init_q_left is the start position for the iiwa robot
  • model/ contains the hole's model, including the mesh and urdf files
  • In the simulation, I firstly command a vertical downward velocity for the peg to make contact with the hole surface and then command a vertical downward force at the end of peg. This applied force locates at the edge of the peg's end and points into the hole's surface (not points into the hollow hole). Since the hole's surface should be able to counteract this force, the peg shouldn't tilt much.