Replies: 1 comment 2 replies
-
|
The startup codes are part of the Mac ROM - not BlueSCSI. If there is a bootable device on those SCSI ID's (with a blessed folder) the key combo will work. |
Beta Was this translation helpful? Give feedback.
-
|
Device 0 on the BlueSCSI is bootable, but at times the system does not seem to see it. This is on a Color Classic Mystic system. The bootable drive, ‘HD0 CC SSD.hda’, usually works. It’s running System 8.1. The other drive folders are not bootable |
Beta Was this translation helpful? Give feedback.
-
|
A few things - if it's intermittent it may be a power or termination issue - You should fully go through our troubleshooting guide first to rule out any of those common issues. Second Mystic systems need special enablers and/or hardware mods - not all systems will boot when in a CC. See: https://powercc.org/mystic/ - I personally use the Option 2 software mod with 7.1 and system enabler 065 v1.1. You can also use/try System Picker to switch between drives and system folders. |
Beta Was this translation helpful? Give feedback.
-
Does BlueSCSI recognize MacOS startup key combinations? I’ve tried cmd-opt-shift-delete-[SCSI ID] to try booting from different devices on the SD card, but no luck
Beta Was this translation helpful? Give feedback.
All reactions