A handy breakout board to get all important voltages from an standard ATX power supply.
- Status: Complete
- Difficulty: 4/5
| Quantity | Name | Description | Signing/Colorcode |
|---|---|---|---|
| 3 | R1, R3, R7 | 3.3 k ohm 0805 resistor | 3301 or 332 |
| 1 | R2 | 330 ohm 0805 resistor | 3300 or 331 |
| 3 | R4, R5, R6 | 1.2 k ohm 0805 resistor | 1201 or 122 |
| 1 | R8 | 10 k ohm 0805 resistor | 1002 or 103 |
| 1 | R9 | 9 ohm 10 W power resistor (optional) | |
| 2 | R10, R15 | 43 k ohm 0805 resistor | 4302 or 433 |
| 4 | R12, R14, R17, R19 | 51 k ohm 0805 resistor | 5102 or 513 |
| 2 | R11, R16 | 75 k ohm 0805 resistor | 7502 or 753 |
| 2 | C1,C3 | 0.1 uF 0805 SMD capacitor | red stripe |
| 1 | C2 | 1 uF 0805 SMD capacitor | blue stripe |
| 6 | LED1, LED3--LED7 | 0805 SMD LED red | |
| 1 | LED2 | 0805 SMD LED green | |
| 4 | F1,--F4 | 1812 SMD PTC Fuse 3A | T300 |
| 1 | U1 | TPS2513 | |
| 1 | IC1 | LM-317 (through hole) | |
| 2 | X1, X2 | USB female connector (through hole) | |
| 6 | JP1--JP6 | 5-pin header | |
| 1 | JP7 | 3-pin header (optional) | |
| 1 | SW1 | 8mm x 8mm push button | |
| 1 | VR1 | 2 k ohm PCB mount potentiometer 9 mm | |
| 1 | J1 | 24-pin ATX connector | |
| 5 | T1--T3, T5, T6, | Red 4mm Binding Post | |
| 1 | T4 | Black B4mm Binding Post | |
| 1 | Board |
You can find the manual and pictures of every step in the manual folder.
The board has beend designed by Francesco Truzzi:
- http://www.truzzi.me/new-atx-breakout-board-pcbs-with-some-additions/
- https://github.com/ftruzzi/ATX-Breakout-Mini
- Board: Open-Source-Hardware License - Francesco Truzzi
- Manual (TeX): LPPL - Marei Peischl
- Manual (pdf): CC-BY-SA 4.0 - Binary Kitchen e.V.