From 7b62b19c249bf138fb8159d4b49961de866a0e22 Mon Sep 17 00:00:00 2001 From: Quentin Date: Tue, 17 Oct 2023 18:10:30 +0200 Subject: [PATCH] Update v2.md --- dilemma_build_guide/v2.md | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/dilemma_build_guide/v2.md b/dilemma_build_guide/v2.md index eaf45b8..14e2581 100644 --- a/dilemma_build_guide/v2.md +++ b/dilemma_build_guide/v2.md @@ -12,7 +12,7 @@ parent: Dilemma Build guides # Installing the per-key RGB -If you ordered a kit with per-key RGB, we will start by installing those. If you don't have LEDs, you can skip to the next section +If you ordered a kit with per-key RGB, we will start by installing those. If you don't have LEDs, you can skip to the next section. {: .warning } The LEDs need to be installed in a very specific way. Read the following instructions carefully first, and then install them. If you don't, they will not work ! @@ -25,7 +25,8 @@ Inspect the LED: there is one of the pins that has a slight chamfer in it. The p ![](../assets/pics/guides/dilemmav2/11.jpg) -- Inspect the PCBs: for each LED footprint, there is one pin that has a white line next to it +- Inspect the PCBs: for each LED footprint, there is one pin that has a white dot next to it +- All the LEDs are intalled in the same direction. If one dot is obscured by the silkscreen, just install the LED the same way as the others - **We need to match the chamfered pin of the LED, with the marked pin on the PCB** {: .warning }