diff --git a/dilemma_build_guide/v2.md b/dilemma_build_guide/v2.md
index eaf45b8..14e2581 100644
--- a/dilemma_build_guide/v2.md
+++ b/dilemma_build_guide/v2.md
@@ -12,7 +12,7 @@ parent: Dilemma Build guides
 
 # Installing the per-key RGB
 
-If you ordered a kit with per-key RGB, we will start by installing those. If you don't have LEDs, you can skip to the next section
+If you ordered a kit with per-key RGB, we will start by installing those. If you don't have LEDs, you can skip to the next section.
 
 {: .warning }
 The LEDs need to be installed in a very specific way. Read the following instructions carefully first, and then install them. If you don't, they will not work ! 
@@ -25,7 +25,8 @@ Inspect the LED: there is one of the pins that has a slight chamfer in it. The p
 
 ![](../assets/pics/guides/dilemmav2/11.jpg)
 
-- Inspect the PCBs: for each LED footprint, there is one pin that has a white line next to it
+- Inspect the PCBs: for each LED footprint, there is one pin that has a white dot next to it
+- All the LEDs are intalled in the same direction. If one dot is obscured by the silkscreen, just install the LED the same way as the others
 - **We need to match the chamfered pin of the LED, with the marked pin on the PCB**
 
 {: .warning }