From 388c0e9acf9435f63173169af7777336dad74447 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Tue, 2 May 2023 17:59:27 -0500 Subject: [PATCH] =?UTF-8?q?=E2=9C=A8=20Creality=20STM32F401RE=20board=20(e?= =?UTF-8?q?.g.,=20Ender-5=20S1)=20(#25773)?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- Marlin/Configuration.h | 1 + Marlin/src/core/boards.h | 1 + Marlin/src/gcode/gcode.cpp | 4 + Marlin/src/gcode/gcode.h | 5 + Marlin/src/gcode/ota/M936.cpp | 72 +++ Marlin/src/inc/Conditionals_post.h | 4 + Marlin/src/inc/Warnings.cpp | 14 + Marlin/src/module/thermistor/thermistor_1.h | 4 + Marlin/src/module/thermistor/thermistor_14.h | 85 +++ Marlin/src/module/thermistor/thermistors.h | 3 + Marlin/src/pins/pins.h | 2 + Marlin/src/pins/stm32f4/pins_CREALITY_F401.h | 241 +++++++++ .../boards/marlin_CREALITY_STM32F401RE.json | 65 +++ .../share/PlatformIO/ldscripts/creality.ld | 2 +- .../PeripheralPins.c | 252 +++++++++ .../MARLIN_CREALITY_STM32F401RE/PinNamesVar.h | 33 ++ .../hal_conf_custom.h | 495 ++++++++++++++++++ .../MARLIN_CREALITY_STM32F401RE/ldscript.ld | 186 +++++++ .../MARLIN_CREALITY_STM32F401RE/variant.cpp | 238 +++++++++ .../MARLIN_CREALITY_STM32F401RE/variant.h | 151 ++++++ ini/features.ini | 1 + 21 files changed, 1858 insertions(+), 1 deletion(-) create mode 100644 Marlin/src/gcode/ota/M936.cpp create mode 100644 Marlin/src/module/thermistor/thermistor_14.h create mode 100644 Marlin/src/pins/stm32f4/pins_CREALITY_F401.h create mode 100644 buildroot/share/PlatformIO/boards/marlin_CREALITY_STM32F401RE.json create mode 100644 buildroot/share/PlatformIO/variants/MARLIN_CREALITY_STM32F401RE/PeripheralPins.c create mode 100644 buildroot/share/PlatformIO/variants/MARLIN_CREALITY_STM32F401RE/PinNamesVar.h create mode 100644 buildroot/share/PlatformIO/variants/MARLIN_CREALITY_STM32F401RE/hal_conf_custom.h create mode 100644 buildroot/share/PlatformIO/variants/MARLIN_CREALITY_STM32F401RE/ldscript.ld create mode 100644 buildroot/share/PlatformIO/variants/MARLIN_CREALITY_STM32F401RE/variant.cpp create mode 100644 buildroot/share/PlatformIO/variants/MARLIN_CREALITY_STM32F401RE/variant.h diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index e11fba093572..6dea2e84697e 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -489,6 +489,7 @@ * 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1% * 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed * 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1% + * 14 : 100kΩ (R25), 4092K (beta25), 4.7kΩ pull-up, bed thermistor as used in Ender-5 S1 * 15 : 100kΩ Calibrated for JGAurora A5 hotend * 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327 * 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index e2b70bbced16..dd1a5db6c9ad 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -450,6 +450,7 @@ #define BOARD_FYSETC_SPIDER_KING407 5243 // FYSETC Spider King407 (STM32F407ZG) #define BOARD_MKS_SKIPR_V1 5244 // MKS SKIPR v1.0 all-in-one board (STM32F407VE) #define BOARD_TRONXY_V10 5245 // TRONXY V10 (STM32F446ZE) +#define BOARD_CREALITY_F401RE 5246 // Creality CR4NS200141C13 (STM32F401RE) as found in the Ender-5 S1 // // ARM Cortex-M7 diff --git a/Marlin/src/gcode/gcode.cpp b/Marlin/src/gcode/gcode.cpp index cf9a1f22ffe3..92f26db6818c 100644 --- a/Marlin/src/gcode/gcode.cpp +++ b/Marlin/src/gcode/gcode.cpp @@ -1123,6 +1123,10 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) { case 422: M422(); break; // M422: Set Z Stepper automatic alignment position using probe #endif + #if ENABLED(OTA_FIRMWARE_UPDATE) + case 936: M936(); break; // M936: OTA update firmware. + #endif + #if SPI_FLASH_BACKUP case 993: M993(); break; // M993: Backup SPI Flash to SD case 994: M994(); break; // M994: Load a Backup from SD to SPI Flash diff --git a/Marlin/src/gcode/gcode.h b/Marlin/src/gcode/gcode.h index cc7fdb198499..b269d518b712 100644 --- a/Marlin/src/gcode/gcode.h +++ b/Marlin/src/gcode/gcode.h @@ -300,6 +300,7 @@ * M913 - Set HYBRID_THRESHOLD speed. (Requires HYBRID_THRESHOLD) * M914 - Set StallGuard sensitivity. (Requires SENSORLESS_HOMING or SENSORLESS_PROBING) * M919 - Get or Set motor Chopper Times (time_off, hysteresis_end, hysteresis_start) using axis codes XYZE, etc. If no parameters are given, report. (Requires at least one _DRIVER_TYPE defined as TMC2130/2160/5130/5160/2208/2209/2660) + * M936 - OTA update firmware. (Requires OTA_FIRMWARE_UPDATE) * M951 - Set Magnetic Parking Extruder parameters. (Requires MAGNETIC_PARKING_EXTRUDER) * M3426 - Read MCP3426 ADC over I2C. (Requires HAS_MCP3426_ADC) * M7219 - Control Max7219 Matrix LEDs. (Requires MAX7219_GCODE) @@ -1204,6 +1205,10 @@ class GcodeSuite { static void M928(); #endif + #if ENABLED(OTA_FIRMWARE_UPDATE) + static void M936(); + #endif + #if ENABLED(MAGNETIC_PARKING_EXTRUDER) static void M951(); #endif diff --git a/Marlin/src/gcode/ota/M936.cpp b/Marlin/src/gcode/ota/M936.cpp new file mode 100644 index 000000000000..6324b3db437f --- /dev/null +++ b/Marlin/src/gcode/ota/M936.cpp @@ -0,0 +1,72 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#include "../../inc/MarlinConfig.h" + +#if ENABLED(OTA_FIRMWARE_UPDATE) + +#include "../gcode.h" +#include "../../libs/BL24CXX.h" + +#if ENABLED(CREALITY_RTS) + #include "../../lcd/rts/lcd_rts.h" +#endif + +#define OTA_FLAG_EEPROM 90 + +//#define DEBUG_OUT 1 +#include "../../core/debug_out.h" + +/** + * M936: Set one of the OTA update flags. + * V2 = Upgrade the motherboard firmware + * V3 = Upgrade the RTS controller firmware + */ +void GcodeSuite::M936() { + static uint8_t ota_update_flag = 0x00; + const int16_t ota = parser.intval('V', -1); + switch (ota) { + case 2: + // Set the OTA board firmware upgrade flag ahead of reboot. + ota_update_flag = 0x01; + DEBUG_ECHOLNPGM("Motherboard upgrade flag set"); + TERN_(CREALITY_RTS, RTS_Error(Error_205)); + break; + + #if ENABLED(CREALITY_RTS) + case 3: + // Set the OTA screen firmware upgrade flag ahead of reboot. + ota_update_flag = 0x02; + DEBUG_ECHOLNPGM("DWIN upgrade flag set"); + TERN_(CREALITY_RTS, RTS_Error(Error_206)); + break; + #endif + } + + switch (ota) { + case 2: TERN_(CREALITY_RTS, case 3:) + BL24CXX::write(OTA_FLAG_EEPROM, &ota_update_flag, sizeof(ota_update_flag)); + safe_delay(100); + hal.reboot(); + } +} + +#endif // OTA_FIRMWARE_UPDATE diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h index cd107fa98103..e5072b116a75 100644 --- a/Marlin/src/inc/Conditionals_post.h +++ b/Marlin/src/inc/Conditionals_post.h @@ -65,6 +65,10 @@ #undef IIC_BL24CXX_EEPROM #endif +#if DISABLED(IIC_BL24CXX_EEPROM) + #undef OTA_FIRMWARE_UPDATE +#endif + #ifdef TEENSYDUINO #undef max #define max(a,b) ((a)>(b)?(a):(b)) diff --git a/Marlin/src/inc/Warnings.cpp b/Marlin/src/inc/Warnings.cpp index 0f699e92bb7e..d6ee4405d18f 100644 --- a/Marlin/src/inc/Warnings.cpp +++ b/Marlin/src/inc/Warnings.cpp @@ -808,3 +808,17 @@ #if MULTISTEPPING_LIMIT_WARNING #warning "MULTISTEPPING_LIMIT has been automatically set to 128. Use a lower value if the machine is slow to respond." #endif + +#if SDSORT_CACHE_VFATS_WARNING + #warning "SDSORT_CACHE_VFATS has been reduced to VFAT_ENTRIES_LIMIT." +#endif +#if SDSORT_CACHE_LPC1768_WARNING + #warning "SDCARD_SORT_ALPHA sub-options overridden for LPC1768 with DOGM LCD SCK overlap." +#endif + +/** + * Ender-5 S1 bootloader + */ +#ifdef STM32F4_UPDATE_FOLDER + #warning "Place the firmware bin file in a folder named 'STM32F4_UPDATE' on the SD card. Install with 'M936 V2'." +#endif diff --git a/Marlin/src/module/thermistor/thermistor_1.h b/Marlin/src/module/thermistor/thermistor_1.h index 2ebf8da550a0..e581f1b5cd4b 100644 --- a/Marlin/src/module/thermistor/thermistor_1.h +++ b/Marlin/src/module/thermistor/thermistor_1.h @@ -23,6 +23,10 @@ // R25 = 100 kOhm, beta25 = 4092 K, 4.7 kOhm pull-up, bed thermistor constexpr temp_entry_t temptable_1[] PROGMEM = { + { OV( 18), 320 }, + { OV( 19), 315 }, + { OV( 20), 310 }, + { OV( 22), 305 }, { OV( 23), 300 }, { OV( 25), 295 }, { OV( 27), 290 }, diff --git a/Marlin/src/module/thermistor/thermistor_14.h b/Marlin/src/module/thermistor/thermistor_14.h new file mode 100644 index 000000000000..f0bc6f606ee8 --- /dev/null +++ b/Marlin/src/module/thermistor/thermistor_14.h @@ -0,0 +1,85 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +// R25 = 100 kOhm, beta25 = 4092 K, 4.7 kOhm pull-up, bed thermistor +const temp_entry_t temptable_14[] PROGMEM = { + { OV( 23), 275 }, + { OV( 25), 270 }, + { OV( 27), 265 }, + { OV( 28), 260 }, + { OV( 31), 255 }, + { OV( 33), 250 }, + { OV( 35), 245 }, + { OV( 38), 240 }, + { OV( 41), 235 }, + { OV( 44), 230 }, + { OV( 47), 225 }, + { OV( 52), 220 }, + { OV( 56), 215 }, + { OV( 62), 210 }, + { OV( 68), 205 }, + { OV( 74), 200 }, + { OV( 81), 195 }, + { OV( 90), 190 }, + { OV( 99), 185 }, + { OV( 108), 180 }, + { OV( 121), 175 }, + { OV( 133), 170 }, + { OV( 147), 165 }, + { OV( 162), 160 }, + { OV( 180), 155 }, + { OV( 199), 150 }, + { OV( 219), 145 }, + { OV( 243), 140 }, + { OV( 268), 135 }, + { OV( 296), 130 }, + { OV( 326), 125 }, + { OV( 358), 120 }, + { OV( 398), 115 }, + { OV( 435), 110 }, + { OV( 476), 105 }, + { OV( 519), 100 }, + { OV( 566), 95 }, + { OV( 610), 90 }, + { OV( 658), 85 }, + { OV( 703), 80 }, + { OV( 742), 75 }, + { OV( 773), 70 }, + { OV( 807), 65 }, + { OV( 841), 60 }, + { OV( 871), 55 }, + { OV( 895), 50 }, + { OV( 918), 45 }, + { OV( 937), 40 }, + { OV( 954), 35 }, + { OV( 968), 30 }, + { OV( 978), 25 }, + { OV( 985), 20 }, + { OV( 993), 15 }, + { OV( 999), 10 }, + { OV(1004), 5 }, + { OV(1008), 0 }, + { OV(1012), -5 }, + { OV(1016), -10 }, + { OV(1020), -15 } +}; diff --git a/Marlin/src/module/thermistor/thermistors.h b/Marlin/src/module/thermistor/thermistors.h index b7cba85e1a59..d75a1de9173d 100644 --- a/Marlin/src/module/thermistor/thermistors.h +++ b/Marlin/src/module/thermistor/thermistors.h @@ -109,6 +109,9 @@ typedef struct { raw_adc_t value; celsius_t celsius; } temp_entry_t; //#if ANY_THERMISTOR_IS(13) // beta25 = 4100 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "Hisens" #include "thermistor_13.h" //#endif +#if ANY_THERMISTOR_IS(14) // beta25 = 4092 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "EPCOS" for hot bed + #include "thermistor_14.h" +#endif #if ANY_THERMISTOR_IS(15) // JGAurora A5 thermistor calibration #include "thermistor_15.h" #endif diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index 75856cb4e217..adf9346f8a07 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -735,6 +735,8 @@ #include "stm32f4/pins_MKS_SKIPR_V1_0.h" // STM32F4 env:mks_skipr_v1 env:mks_skipr_v1_nobootloader #elif MB(TRONXY_V10) #include "stm32f4/pins_TRONXY_V10.h" // STM32F4 env:STM32F446_tronxy +#elif MB(CREALITY_F401RE) + #include "stm32f4/pins_CREALITY_F401.h" // STM32F4 env:STM32F401RE_creality // // ARM Cortex M7 diff --git a/Marlin/src/pins/stm32f4/pins_CREALITY_F401.h b/Marlin/src/pins/stm32f4/pins_CREALITY_F401.h new file mode 100644 index 000000000000..7f9eba990137 --- /dev/null +++ b/Marlin/src/pins/stm32f4/pins_CREALITY_F401.h @@ -0,0 +1,241 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#include "env_validate.h" + +#define BOARD_INFO_NAME "STM32F401RET6" +#define DEFAULT_MACHINE_NAME "Ender-5 S1" + +#define IIC_BL24CXX_EEPROM // EEPROM on I2C-0 used only for display settings +#if ENABLED(IIC_BL24CXX_EEPROM) + #define IIC_EEPROM_SDA PA11 + #define IIC_EEPROM_SCL PA12 + #define MARLIN_EEPROM_SIZE 0x800 // 2Kb (24C16) +#else + #define SDCARD_EEPROM_EMULATION // SD EEPROM until all EEPROM is BL24CXX + #define MARLIN_EEPROM_SIZE 0x800 // 2Kb +#endif + +// SPI +//#define SPI_EEPROM // EEPROM on SPI-0 +//#define SPI_CHAN_EEPROM1 ? +//#define SPI_EEPROM1_CS ? + +// 2K EEPROM +//#define SPI_EEPROM2_CS ? + +// 32Mb FLASH +//#define SPI_FLASH_CS ? + +// +// Servos +// +#define SERVO0_PIN PC13 // BLTouch OUT + +// +// Limit Switches +// +#define X_STOP_PIN PA5 +#define Y_STOP_PIN PA6 + +#if ENABLED(BLTOUCH) + #define Z_MAX_PIN PA15 // ROCK_20220730 + #define Z_MIN_PIN PC14 + //#define Z_STOP_PIN_NADD PA15 // Added z-axis limit switch +#elif ENABLED(PROBE_ACTIVATION_SWITCH) + #define Z_MIN_PIN PA15 + #define PROBE_TARE_PIN PC14 + #define PROBE_ACTIVATION_SWITCH_PIN PB2 +#else + #define Z_MIN_PIN PA15 +#endif + +// +// Filament runout +// +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define FIL_RUNOUT_PIN PC15 +#endif + +// +// Steppers Motor drive chip power control +// +#define X_ENABLE_PIN PC3 +#define X_STEP_PIN PC2 +#define X_DIR_PIN PB9 + +#define Y_ENABLE_PIN PC3 +#define Y_STEP_PIN PB8 +#define Y_DIR_PIN PB7 + +#define Z_ENABLE_PIN PC3 +#define Z_STEP_PIN PB6 +#define Z_DIR_PIN PB5 + +#define E0_ENABLE_PIN PC3 +#define E0_STEP_PIN PB4 +#define E0_DIR_PIN PB3 + +// +// Temperature Sensors +// +#ifndef TEMP_0_PIN + #define TEMP_0_PIN PC5 // E1_THERMISTOR PA0 -> PT100 +#endif +#define TEMP_BED_PIN PC4 // BED_THERMISTOR_1 + +// +// Heaters / Fans +// +#define HEATER_0_PIN PA1 // E1_HEAT_PWM +#define HEATER_BED_PIN PA7 // BED_HEAT_1 FET + +#define FAN0_PIN PA0 // Part cooling fan FET +//#define FAN1_PIN PE11 // Extruder fan FET +//#define FAN2_PIN PE1 // Controller fan FET + +#ifndef E0_AUTO_FAN_PIN + #define E0_AUTO_FAN_PIN PA1 // FAN1_PIN +#endif + +// +// SD Card +// +#define SD_DETECT_PIN PC7 +#define SDCARD_CONNECTION ONBOARD +#define ONBOARD_SPI_DEVICE 1 +#define ONBOARD_SD_CS_PIN PC12 // SDSS +#define SDIO_SUPPORT +#define NO_SD_HOST_DRIVE // This board's SD is only seen by the printer + +// SPI 2 +#if ENABLED(RET6_12864_LCD) + + #define LCD_PINS_RS PB12 + #define LCD_PINS_ENABLE PB15 + #define LCD_PINS_D4 PB13 + #define BTN_EN2 PB14 +#endif + +//#define LED_CONTROL_PIN PA7 + +// +// WiFI Reset +// +#ifdef MENU_RESET_WIFI + #define RESET_WIFI_PIN PB12 +#endif + +// +// Backpower +// +#ifndef BACKPOWER_CTRL_PIN + #define BACKPOWER_CTRL_PIN PA4 // Pull down on the electricity, When the ADC detects that the 24V power supply is below 20V, Save the continued call data first, PA4 = 1 +#endif + +#ifndef CHECK_24V_PIN + #define POWER_DETECTION_PIN PB0 // Detect ADC input pin of 24V power supply +#endif + +/** + * Logical pin vs. port/pin cross reference + * + * PA0 54 // E1_THERMISTOR PA9 0 // TX + * PA1 55 // E2_THERMISTOR PA10 1 // RX + * PA2 56 // E3_THERMISTOR PD3 2 // CTS + * PA3 53 // BED_THERMISTOR_3 PD4 3 // RTS + * PA4 16 // SPI_CS PD5 4 // TX + * PA5 17 // SPI_SCK PD6 5 // RX + * PA6 18 // SPI_MISO PB5 6 // WIFI_WAKEUP + * PA7 19 // SPI_MOSI PE11 7 // WIFI_RESET + * PA8 43 // V_STOP PE12 8 // WIFI_BOOT + * PA9 0 // TX PE1 9 // STATUS_LED + * PA10 1 // RX PB12 10 // SPI_CS + * PA11 30 // OTG_DM PB15 11 // SPI_MOSI + * PA12 31 // OTG_DP PB14 12 // SPI_MISO + * PA13 20 // JTAG_TMS/SWDIO PB13 13 // SPI_SCK + * PA14 21 // JTAG_TCK/SWCLK PB7 14 // SDA + * PA15 25 // SD_CARD_DETECT PB6 15 // SCL + * PB0 49 // E2_HEAT_PWM PA4 16 // SPI_CS + * PB1 50 // E3_HEAT_PWM PA5 17 // SPI_SCK + * PB3 22 // JTAG_TDO/SWO PA6 18 // SPI_MISO + * PB4 37 // USER4 PA7 19 // SPI_MOSI + * PB5 6 // WIFI_WAKEUP PA13 20 // JTAG_TMS/SWDIO + * PB6 15 // SCL PA14 21 // JTAG_TCK/SWCLK + * PB7 14 // SDA PB3 22 // JTAG_TDO/SWO + * PB8 77 // E3_PWM PC8 23 // SDIO_D0 + * PB9 35 // USER1 PC9 24 // SDIO_D1 + * PB10 64 // Y_PWM PA15 25 // SD_CARD_DETECT + * PB12 10 // SPI_CS PC10 26 // SDIO_D2 + * PB13 13 // SPI_SCK PC11 27 // SDIO_D3 + * PB14 12 // SPI_MISO PC12 28 // SDIO_CK + * PB15 11 // SPI_MOSI PD2 29 // SDIO_CMD + * PC0 68 // Z_DIR PA11 30 // OTG_DM + * PC1 33 // IR_ON PA12 31 // OTG_DP + * PC2 51 // BED_THERMISTOR_1 PD1 32 // IR_OUT + * PC3 52 // BED_THERMISTOR_2 PC1 33 // IR_ON + * PC4 57 // E1_FAN PD7 34 // USER3 + * PC5 58 // E2_FAN PB9 35 // USER1 + * PC6 67 // Z_PWM PE0 36 // USER2 + * PC7 48 // E1_HEAT_PWM PB4 37 // USER4 + * PC8 23 // SDIO_D0 PE7 38 // USER_BUTTON + * PC9 24 // SDIO_D1 PD8 39 // X_STOP + * PC10 26 // SDIO_D2 PD9 40 // Y_STOP + * PC11 27 // SDIO_D3 PD10 41 // Z_STOP + * PC12 28 // SDIO_CK PD11 42 // U_STOP + * PC13 70 // E1_DIR PA8 43 // V_STOP + * PC14 69 // E1_RESET PD0 44 // W_STOP + * PC15 66 // Z_RESET PD13 45 // BED_HEAT_2 + * PD0 44 // W_STOP PD14 46 // BED_HEAT_1 + * PD1 32 // IR_OUT PD15 47 // BED_HEAT_3 + * PD2 29 // SDIO_CMD PC7 48 // E1_HEAT_PWM + * PD3 2 // CTS PB0 49 // E2_HEAT_PWM + * PD4 3 // RTS PB1 50 // E3_HEAT_PWM + * PD5 4 // TX PC2 51 // BED_THERMISTOR_1 + * PD6 5 // RX PC3 52 // BED_THERMISTOR_2 + * PD7 34 // USER3 PA3 53 // BED_THERMISTOR_3 + * PD8 39 // X_STOP PA0 54 // E1_THERMISTOR + * PD9 40 // Y_STOP PA1 55 // E2_THERMISTOR + * PD10 41 // Z_STOP PA2 56 // E3_THERMISTOR + * PD11 42 // U_STOP PC4 57 // E1_FAN + * PD12 71 // E1_PWM PC5 58 // E2_FAN + * PD13 45 // BED_HEAT_2 PE8 59 // E3_FAN + * PD14 46 // BED_HEAT_1 PE13 60 // X_RESET + * PD15 47 // BED_HEAT_3 PE14 61 // X_PWM + * PE0 36 // USER2 PE15 62 // X_DIR + * PE1 9 // STATUS_LED PE10 63 // Y_RESET + * PE2 76 // E3_DIR PB10 64 // Y_PWM + * PE3 75 // E3_RESET PE9 65 // Y_DIR + * PE4 72 // E2_RESET PC15 66 // Z_RESET + * PE5 73 // E2_PWM PC6 67 // Z_PWM + * PE6 74 // E2_DIR PC0 68 // Z_DIR + * PE7 38 // USER_BUTTON PC14 69 // E1_RESET + * PE8 59 // E3_FAN PC13 70 // E1_DIR + * PE9 65 // Y_DIR PD12 71 // E1_PWM + * PE10 63 // Y_RESET PE4 72 // E2_RESET + * PE11 7 // WIFI_RESET PE5 73 // E2_PWM + * PE12 8 // WIFI_BOOT PE6 74 // E2_DIR + * PE13 60 // X_RESET PE3 75 // E3_RESET + * PE14 61 // X_PWM PE2 76 // E3_DIR + * PE15 62 // X_DIR PB8 77 // E3_PWM + */ diff --git a/buildroot/share/PlatformIO/boards/marlin_CREALITY_STM32F401RE.json b/buildroot/share/PlatformIO/boards/marlin_CREALITY_STM32F401RE.json new file mode 100644 index 000000000000..31739c3a386a --- /dev/null +++ b/buildroot/share/PlatformIO/boards/marlin_CREALITY_STM32F401RE.json @@ -0,0 +1,65 @@ +{ + "build": { + "core": "stm32", + "cpu": "cortex-m4", + "extra_flags": "-DSTM32F401xx", + "f_cpu": "84000000L", + "hwids": [ + [ + "0x1EAF", + "0x0003" + ], + [ + "0x0483", + "0x3748" + ] + ], + "ldscript": "ldscript.ld", + "mcu": "stm32f401ret6", + "variant": "MARLIN_CREALITY_STM32F401RE" + }, + "debug": { + "jlink_device": "STM32F401RE", + "openocd_target": "stm32f4x", + "svd_path": "STM32F40x.svd", + "tools": { + "stlink": { + "server": { + "arguments": [ + "-f", + "scripts/interface/stlink.cfg", + "-c", + "transport select hla_swd", + "-f", + "scripts/target/stm32f4x.cfg", + "-c", + "reset_config none" + ], + "executable": "bin/openocd", + "package": "tool-openocd" + } + } + } + }, + "frameworks": [ + "arduino", + "stm32cube" + ], + "name": "STM32F401RE (64k RAM. 512k Flash)", + "upload": { + "disable_flushing": false, + "maximum_ram_size": 65536, + "maximum_size": 514288, + "protocol": "stlink", + "protocols": [ + "stlink", + "dfu", + "jlink" + ], + "require_upload_port": true, + "use_1200bps_touch": false, + "wait_for_upload_port": false + }, + "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f401re.html", + "vendor": "Generic" +} diff --git a/buildroot/share/PlatformIO/ldscripts/creality.ld b/buildroot/share/PlatformIO/ldscripts/creality.ld index 785345543c0c..8b330c9457b2 100644 --- a/buildroot/share/PlatformIO/ldscripts/creality.ld +++ b/buildroot/share/PlatformIO/ldscripts/creality.ld @@ -1,7 +1,7 @@ MEMORY { ram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K - 40 - rom (rx) : ORIGIN = 0x08007000, LENGTH = 512K - 28K + rom (rx) : ORIGIN = 0x08007000, LENGTH = 512K - 64K } /* Provide memory region aliases for common.inc */ diff --git a/buildroot/share/PlatformIO/variants/MARLIN_CREALITY_STM32F401RE/PeripheralPins.c b/buildroot/share/PlatformIO/variants/MARLIN_CREALITY_STM32F401RE/PeripheralPins.c new file mode 100644 index 000000000000..418ef5aa7abc --- /dev/null +++ b/buildroot/share/PlatformIO/variants/MARLIN_CREALITY_STM32F401RE/PeripheralPins.c @@ -0,0 +1,252 @@ +/* + ******************************************************************************* + * Copyright (c) 2019, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + * Automatically generated from STM32F401R[(B-C)|(D-E)]Tx.xml + */ +#include "Arduino.h" +#include "PeripheralPins.h" + +/* ===== + * Note: Commented lines are alternative possibilities which are not used per default. + * If you change them, you will have to know what you do + * ===== + */ + +//*** ADC *** + +#ifdef HAL_ADC_MODULE_ENABLED +WEAK const PinMap PinMap_ADC[] = { + {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0 + {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1 + {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2 + {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3 + {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4 + {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5 + {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6 + {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7 + {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8 + {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9 + {PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10 + {PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11 + {PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12 + {PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13 + {PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14 + {PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15 + {NC, NP, 0} +}; +#endif + +//*** No DAC *** + +//*** I2C *** + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SDA[] = { + {PB_3, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)}, + {PB_4, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)}, + {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, + {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, + {PC_9, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)}, + {NC, NP, 0} +}; + +WEAK const PinMap PinMap_I2C_SCL[] = { + {PA_8, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)}, + {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, + {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, + {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, + {NC, NP, 0} +}; +#endif + +//*** PWM *** + +#ifdef HAL_TIM_MODULE_ENABLED +WEAK const PinMap PinMap_PWM[] = { + //{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 + {PA_0, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1 + //{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 + {PA_1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2 + //{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 + {PA_2, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3 + //{PA_2, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1 + //{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 + {PA_3, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4 + //{PA_3, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2 + {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 + {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 + //{PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N + {PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 + {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1 + {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2 + {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3 + {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4 + {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 + //{PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N + {PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 + //{PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N + {PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4 + {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 + {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 + {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 + {PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 + {PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2 + {PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3 + //{PB_8, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1 + {PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4 + //{PB_9, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1 + {PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 + {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N + {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N + {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N + {PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 + {PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 + {PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 + {PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4 + {NC, NP, 0} +}; +#endif + +//*** SERIAL *** + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_TX[] = { + {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, + {PA_11, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, + {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, + {PC_6, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, + {NC, NP, 0} +}; + +WEAK const PinMap PinMap_UART_RX[] = { + {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, + {PA_12, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, + {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, + {PC_7, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, + {NC, NP, 0} +}; + +WEAK const PinMap PinMap_UART_RTS[] = { + {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, + {NC, NP, 0} +}; + +WEAK const PinMap PinMap_UART_CTS[] = { + {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, + {NC, NP, 0} +}; +#endif + +//*** SPI *** + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MOSI[] = { + {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, + //{PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, + {PB_5, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, + {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {PC_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {PC_12, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, + {NC, NP, 0} +}; + +WEAK const PinMap PinMap_SPI_MISO[] = { + {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, + //{PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, + {PB_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, + {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {PC_2, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {PC_11, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, + {NC, NP, 0} +}; + +WEAK const PinMap PinMap_SPI_SCLK[] = { + {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, + //{PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, + {PB_3, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, + {PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {PC_10, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, + {NC, NP, 0} +}; + +WEAK const PinMap PinMap_SPI_SSEL[] = { + {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, + //{PA_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, + //{PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, + {PA_15, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, + {PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {NC, NP, 0} +}; +#endif + +//*** No CAN *** + +//*** No ETHERNET *** + +//*** No QUADSPI *** + +//*** USB *** + +#ifdef HAL_PCD_MODULE_ENABLED +WEAK const PinMap PinMap_USB_OTG_FS[] = { +#ifndef ARDUINO_CoreBoard_F401RC + {PA_8, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_SOF + {PA_9, USB_OTG_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_FS_VBUS + {PA_10, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_ID +#endif + {PA_11, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DM + {PA_12, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DP + {NC, NP, 0} +}; +#endif + +//*** No USB_OTG_HS *** + +//*** SD *** + +#ifdef HAL_SD_MODULE_ENABLED +WEAK const PinMap PinMap_SD[] = { + {PB_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D4 + {PB_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D5 + {PC_6, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D6 + {PC_7, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D7 + {PC_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D0 + {PC_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D1 + {PC_10, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D2 + {PC_11, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D3 + {PC_12, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CK + {PD_2, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CMD + {NC, NP, 0} +}; +#endif diff --git a/buildroot/share/PlatformIO/variants/MARLIN_CREALITY_STM32F401RE/PinNamesVar.h b/buildroot/share/PlatformIO/variants/MARLIN_CREALITY_STM32F401RE/PinNamesVar.h new file mode 100644 index 000000000000..f5db451e6f19 --- /dev/null +++ b/buildroot/share/PlatformIO/variants/MARLIN_CREALITY_STM32F401RE/PinNamesVar.h @@ -0,0 +1,33 @@ +/* SYS_WKUP */ +#ifdef PWR_WAKEUP_PIN1 + SYS_WKUP1 = PA_0, +#endif +#ifdef PWR_WAKEUP_PIN2 + SYS_WKUP2 = NC, +#endif +#ifdef PWR_WAKEUP_PIN3 + SYS_WKUP3 = NC, +#endif +#ifdef PWR_WAKEUP_PIN4 + SYS_WKUP4 = NC, +#endif +#ifdef PWR_WAKEUP_PIN5 + SYS_WKUP5 = NC, +#endif +#ifdef PWR_WAKEUP_PIN6 + SYS_WKUP6 = NC, +#endif +#ifdef PWR_WAKEUP_PIN7 + SYS_WKUP7 = NC, +#endif +#ifdef PWR_WAKEUP_PIN8 + SYS_WKUP8 = NC, +#endif +/* USB */ +#ifdef USBCON + USB_OTG_FS_SOF = PA_8, + USB_OTG_FS_VBUS = PA_9, + USB_OTG_FS_ID = PA_10, + USB_OTG_FS_DM = PA_11, + USB_OTG_FS_DP = PA_12, +#endif diff --git a/buildroot/share/PlatformIO/variants/MARLIN_CREALITY_STM32F401RE/hal_conf_custom.h b/buildroot/share/PlatformIO/variants/MARLIN_CREALITY_STM32F401RE/hal_conf_custom.h new file mode 100644 index 000000000000..1dd047bb9005 --- /dev/null +++ b/buildroot/share/PlatformIO/variants/MARLIN_CREALITY_STM32F401RE/hal_conf_custom.h @@ -0,0 +1,495 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_conf.h + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_CONF_CUSTOM +#define __STM32F4xx_HAL_CONF_CUSTOM + +#ifdef __cplusplus +extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ + /** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +#define HAL_ADC_MODULE_ENABLED +#define HAL_CRC_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED +#define HAL_IWDG_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_RTC_MODULE_ENABLED +#define HAL_SPI_MODULE_ENABLED +#define HAL_TIM_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED +//#define HAL_PCD_MODULE_ENABLED // Automatically added if any type of USB is enabled, as in Arduino IDE. (STM32 v3.10700.191028) + +//#define HAL_CAN_MODULE_ENABLED +//#define HAL_CAN_LEGACY_MODULE_ENABLED +//#define HAL_CEC_MODULE_ENABLED +//#define HAL_CRYP_MODULE_ENABLED +//#define HAL_DAC_MODULE_ENABLED +//#define HAL_DCMI_MODULE_ENABLED +//#define HAL_DMA2D_MODULE_ENABLED +//#define HAL_ETH_MODULE_ENABLED +//#define HAL_NAND_MODULE_ENABLED +//#define HAL_NOR_MODULE_ENABLED +//#define HAL_PCCARD_MODULE_ENABLED +//#define HAL_SRAM_MODULE_ENABLED +//#define HAL_SDRAM_MODULE_ENABLED +//#define HAL_HASH_MODULE_ENABLED +//#define HAL_EXTI_MODULE_ENABLED +//#define HAL_SMBUS_MODULE_ENABLED +//#define HAL_I2S_MODULE_ENABLED +//#define HAL_LTDC_MODULE_ENABLED +//#define HAL_DSI_MODULE_ENABLED +//#define HAL_QSPI_MODULE_ENABLED +//#define HAL_RNG_MODULE_ENABLED +//#define HAL_SAI_MODULE_ENABLED +#define HAL_SD_MODULE_ENABLED +//#define HAL_UART_MODULE_ENABLED +//#define HAL_USART_MODULE_ENABLED +//#define HAL_IRDA_MODULE_ENABLED +//#define HAL_SMARTCARD_MODULE_ENABLED +//#define HAL_WWDG_MODULE_ENABLED +//#define HAL_HCD_MODULE_ENABLED +//#define HAL_FMPI2C_MODULE_ENABLED +//#define HAL_SPDIFRX_MODULE_ENABLED +//#define HAL_DFSDM_MODULE_ENABLED +//#define HAL_LPTIM_MODULE_ENABLED +//#define HAL_MMC_MODULE_ENABLED + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#ifndef HSE_VALUE +#define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#ifndef HSE_STARTUP_TIMEOUT +#define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#ifndef HSI_VALUE +#define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz */ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#ifndef LSI_VALUE +#define LSI_VALUE 32000U /*!< LSI Typical Value in Hz */ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz +The real value may vary depending on the variations +in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#ifndef LSE_VALUE +#define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +#ifndef LSE_STARTUP_TIMEOUT +#define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#ifndef EXTERNAL_CLOCK_VALUE +#define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External oscillator in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#if !defined (VDD_VALUE) +#define VDD_VALUE 3300U /*!< Value of VDD in mv */ +#endif +#if !defined (TICK_INT_PRIORITY) +#define TICK_INT_PRIORITY 0x00U /*!< tick interrupt priority */ +#endif +#if !defined (USE_RTOS) +#define USE_RTOS 0U +#endif +#if !defined (PREFETCH_ENABLE) +#define PREFETCH_ENABLE 1U +#endif +#if !defined (INSTRUCTION_CACHE_ENABLE) +#define INSTRUCTION_CACHE_ENABLE 1U +#endif +#if !defined (DATA_CACHE_ENABLE) +#define DATA_CACHE_ENABLE 1U +#endif + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ +#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ +#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ +#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ +#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ +#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ +#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* ################## Ethernet peripheral configuration ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2U +#define MAC_ADDR1 0U +#define MAC_ADDR2 0U +#define MAC_ADDR3 0U +#define MAC_ADDR4 0U +#define MAC_ADDR5 0U + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ + +/* DP83848_PHY_ADDRESS Address*/ +#define DP83848_PHY_ADDRESS 0x01U +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY 0x000000FFU +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY 0x00000FFFU + +#define PHY_READ_TO 0x0000FFFFU +#define PHY_WRITE_TO 0x0000FFFFU + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ +#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */ + +#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver + * Activated: CRC code is present inside driver + * Deactivated: CRC code cleaned from driver + */ +#ifndef USE_SPI_CRC +#define USE_SPI_CRC 0U +#endif + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED +#include "stm32f4xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED +#include "stm32f4xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED +#include "stm32f4xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED +#include "stm32f4xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED +#include "stm32f4xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED +#include "stm32f4xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED +#include "stm32f4xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CAN_LEGACY_MODULE_ENABLED +#include "stm32f4xx_hal_can_legacy.h" +#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED +#include "stm32f4xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED +#include "stm32f4xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED +#include "stm32f4xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED +#include "stm32f4xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED +#include "stm32f4xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED +#include "stm32f4xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED +#include "stm32f4xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED +#include "stm32f4xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED +#include "stm32f4xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED +#include "stm32f4xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_PCCARD_MODULE_ENABLED +#include "stm32f4xx_hal_pccard.h" +#endif /* HAL_PCCARD_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED +#include "stm32f4xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED +#include "stm32f4xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED +#include "stm32f4xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED +#include "stm32f4xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED +#include "stm32f4xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED +#include "stm32f4xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED +#include "stm32f4xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED +#include "stm32f4xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED +#include "stm32f4xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED +#include "stm32f4xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED +#include "stm32f4xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED +#include "stm32f4xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED +#include "stm32f4xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED +#include "stm32f4xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED +#include "stm32f4xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED +#include "stm32f4xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED +#include "stm32f4xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED +#include "stm32f4xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED +#include "stm32f4xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED +#include "stm32f4xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED +#include "stm32f4xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED +#include "stm32f4xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED +#include "stm32f4xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED +#include "stm32f4xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_FMPI2C_MODULE_ENABLED +#include "stm32f4xx_hal_fmpi2c.h" +#endif /* HAL_FMPI2C_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED +#include "stm32f4xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED +#include "stm32f4xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED +#include "stm32f4xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_MMC_MODULE_ENABLED +#include "stm32f4xx_hal_mmc.h" +#endif /* HAL_MMC_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ +#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ +void assert_failed(uint8_t *file, uint32_t line); +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_HAL_CONF_CUSTOM_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/buildroot/share/PlatformIO/variants/MARLIN_CREALITY_STM32F401RE/ldscript.ld b/buildroot/share/PlatformIO/variants/MARLIN_CREALITY_STM32F401RE/ldscript.ld new file mode 100644 index 000000000000..881b72167ef1 --- /dev/null +++ b/buildroot/share/PlatformIO/variants/MARLIN_CREALITY_STM32F401RE/ldscript.ld @@ -0,0 +1,186 @@ +/* +***************************************************************************** +** +** File : ldscript.ld +** +** Abstract : Linker script for STM32F401RETx Device with +** 512KByte FLASH, 96KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +***************************************************************************** +** @attention +** +**

© COPYRIGHT(c) 2014 Ac6

+** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** 1. Redistributions of source code must retain the above copyright notice, +** this list of conditions and the following disclaimer. +** 2. Redistributions in binary form must reproduce the above copyright notice, +** this list of conditions and the following disclaimer in the documentation +** and/or other materials provided with the distribution. +** 3. Neither the name of Ac6 nor the names of its contributors +** may be used to endorse or promote products derived from this software +** without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20010000; /* end of RAM */ + +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x8000000 + LD_FLASH_OFFSET, LENGTH = LD_MAX_SIZE - LD_FLASH_OFFSET +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 64K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text ALIGN(4): + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} \ No newline at end of file diff --git a/buildroot/share/PlatformIO/variants/MARLIN_CREALITY_STM32F401RE/variant.cpp b/buildroot/share/PlatformIO/variants/MARLIN_CREALITY_STM32F401RE/variant.cpp new file mode 100644 index 000000000000..d603ad6ef1ab --- /dev/null +++ b/buildroot/share/PlatformIO/variants/MARLIN_CREALITY_STM32F401RE/variant.cpp @@ -0,0 +1,238 @@ +/* + Copyright (c) 2011 Arduino. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#include "pins_arduino.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// Digital PinName array +const PinName digitalPin[] = { + PA_0, // Digital pin 0 + PA_1, // Digital pin 1 + PA_2, // Digital pin 2 + PA_3, // Digital pin 3 + PA_4, // Digital pin 4 + PA_5, // Digital pin 5 + PA_6, // Digital pin 6 + PA_7, // Digital pin 7 + PA_8, // Digital pin 8 + PA_9, // Digital pin 9 + PA_10, // Digital pin 10 + PA_11, // Digital pin 11 + PA_12, // Digital pin 12 + PA_13, // Digital pin 13 + PA_14, // Digital pin 14 + PA_15, // Digital pin 15 + + PB_0, // Digital pin 16 + PB_1, // Digital pin 17 + PB_2, // Digital pin 18 + PB_3, // Digital pin 19 + PB_4, // Digital pin 20 + PB_5, // Digital pin 21 + PB_6, // Digital pin 22 + PB_7, // Digital pin 23 + PB_8, // Digital pin 24 + PB_9, // Digital pin 25 + PB_10, // Digital pin 26 + PB_12, // Digital pin 27 + PB_13, // Digital pin 28 + PB_14, // Digital pin 29 + PB_15, // Digital pin 30 + + PC_0, // Digital pin 31 + PC_1, // Digital pin 32 + PC_2, // Digital pin 33 + PC_3, // Digital pin 34 + PC_4, // Digital pin 35 + PC_5, // Digital pin 36 + PC_6, // Digital pin 37 + PC_7, // Digital pin 38 + PC_8, // Digital pin 39 + PC_9, // Digital pin 40 + PC_10, // Digital pin 41 + PC_11, // Digital pin 42 + PC_12, // Digital pin 43 + PC_13, // Digital pin 44 + PC_14, // Digital pin 45 + PC_15, // Digital pin 46 + + PD_2, // Digital pin 47 + + PH_0, // Digital pin 48, used by the external oscillator + PH_1 // Digital pin 49, used by the external oscillator +}; + +// Analog (Ax) pin number array +const uint32_t analogInputPin[] = { + 0, // A0, PA0 + 1, // A1, PA1 + 2, // A2, PA2 + 3, // A3, PA3 + 4, // A4, PA4 + 5, // A5, PA5 + 6, // A6, PA6 + 7, // A7, PA7 + 16, // A8, PB0 + 17, // A9, PB1 + 31, // A10, PC0 + 32, // A11, PC1 + 33, // A12, PC2 + 34, // A13, PC3 + 35, // A14, PC4 + 36 // A15, PC5 +}; + +#ifdef __cplusplus +} +#endif + +// ---------------------------------------------------------------------------- + +#ifdef __cplusplus +extern "C" { +#endif + +/* + * @brief Configures the System clock source, PLL Multiplier and Divider factors, + * AHB/APBx prescalers and Flash settings + * @note This function should be called only once the RCC clock configuration + * is reset to the default reset state (done in SystemInit() function). + * @param None + * @retval None + */ + +/******************************************************************************/ +/* PLL (clocked by HSE) used as System clock source */ +/******************************************************************************/ +static uint8_t SetSysClock_PLL_HSE(uint8_t bypass) +{ + RCC_OscInitTypeDef RCC_OscInitStruct; + RCC_ClkInitTypeDef RCC_ClkInitStruct; + + /* The voltage scaling allows optimizing the power consumption when the device is + clocked below the maximum system frequency, to update the voltage scaling value + regarding system frequency refer to product datasheet. */ + __HAL_RCC_PWR_CLK_ENABLE(); + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2); + + // Enable HSE oscillator and activate PLL with HSE as source + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + if (bypass == 0) { + RCC_OscInitStruct.HSEState = RCC_HSE_ON; // External 8 MHz xtal on OSC_IN/OSC_OUT + } else { + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; // External 8 MHz clock on OSC_IN + } + + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = HSE_VALUE / 1000000L; // Expects an 8 MHz external clock by default. Redefine HSE_VALUE if not + RCC_OscInitStruct.PLL.PLLN = 336; // VCO output clock = 336 MHz (1 MHz * 336) + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4; // PLLCLK = 84 MHz (336 MHz / 4) + RCC_OscInitStruct.PLL.PLLQ = 7; // USB clock = 48 MHz (336 MHz / 7) --> OK for USB + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { + return 0; // FAIL + } + + // Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 84 MHz + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 84 MHz + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; // 42 MHz + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 84 MHz + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) { + return 0; // FAIL + } + + /* Output clock on MCO1 pin(PA8) for debugging purpose */ + /* + if (bypass == 0) + HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_2); // 4 MHz + else + HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_1); // 8 MHz + */ + + return 1; // OK +} + +/******************************************************************************/ +/* PLL (clocked by HSI) used as System clock source */ +/******************************************************************************/ +uint8_t SetSysClock_PLL_HSI(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct; + RCC_ClkInitTypeDef RCC_ClkInitStruct; + + /* The voltage scaling allows optimizing the power consumption when the device is + clocked below the maximum system frequency, to update the voltage scaling value + regarding system frequency refer to product datasheet. */ + __HAL_RCC_PWR_CLK_ENABLE(); + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2); + + // Enable HSI oscillator and activate PLL with HSI as source + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSEState = RCC_HSE_OFF; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLM = 16; // VCO input clock = 1 MHz (16 MHz / 16) + RCC_OscInitStruct.PLL.PLLN = 336; // VCO output clock = 336 MHz (1 MHz * 336) + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4; // PLLCLK = 84 MHz (336 MHz / 4) + RCC_OscInitStruct.PLL.PLLQ = 7; // USB clock = 48 MHz (336 MHz / 7) --> freq is ok but not precise enough + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { + return 0; // FAIL + } + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 84 MHz + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 84 MHz + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; // 42 MHz + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 84 MHz + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) { + return 0; // FAIL + } + + /* Output clock on MCO1 pin(PA8) for debugging purpose */ + //HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSI, RCC_MCODIV_1); // 16 MHz + + return 1; // OK +} + +WEAK void SystemClock_Config(void) +{ + /* 1- If fail try to start with HSE and external xtal */ + if (SetSysClock_PLL_HSE(0) == 0) { + /* 2- Try to start with HSE and external clock */ + if (SetSysClock_PLL_HSE(1) == 0) { + /* 3- If fail start with HSI clock */ + if (SetSysClock_PLL_HSI() == 0) { + Error_Handler(); + } + } + } + /* Output clock on MCO2 pin(PC9) for debugging purpose */ + //HAL_RCC_MCOConfig(RCC_MCO2, RCC_MCO2SOURCE_SYSCLK, RCC_MCODIV_4); +} + +#ifdef __cplusplus +} +#endif diff --git a/buildroot/share/PlatformIO/variants/MARLIN_CREALITY_STM32F401RE/variant.h b/buildroot/share/PlatformIO/variants/MARLIN_CREALITY_STM32F401RE/variant.h new file mode 100644 index 000000000000..591571bf2c89 --- /dev/null +++ b/buildroot/share/PlatformIO/variants/MARLIN_CREALITY_STM32F401RE/variant.h @@ -0,0 +1,151 @@ +/* + Copyright (c) 2011 Arduino. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef _VARIANT_ARDUINO_STM32_ +#define _VARIANT_ARDUINO_STM32_ + +#ifdef __cplusplus +extern "C" { +#endif // __cplusplus + + +// | DIGITAL | ANALOG | USART | TWI | SPI | SPECIAL | +// |---------|--------|-----------|----------|------------------------|-----------| +#define PA0 0 // | 0 | A0 | | | | | +#define PA1 1 // | 1 | A1 | | | | | +#define PA2 2 // | 2 | A2 | USART2_TX | | | | +#define PA3 3 // | 3 | A3 | USART2_RX | | | | +#define PA4 4 // | 4 | A4 | | | SPI1_SS, (SPI3_SS) | | +#define PA5 5 // | 5 | A5 | | | SPI1_SCK | | +#define PA6 6 // | 6 | A6 | | | SPI1_MISO | | +#define PA7 7 // | 7 | A7 | | | SPI1_MOSI | | +#define PA8 8 // | 8 | | | TWI3_SCL | | | +#define PA9 9 // | 9 | | USART1_TX | | | | +#define PA10 10 // | 10 | | USART1_RX | | | | +#define PA11 11 // | 11 | | USART6_TX | | | | +#define PA12 12 // | 12 | | USART6_RX | | | | +#define PA13 13 // | 13 | | | | | SWD_SWDIO | +#define PA14 14 // | 14 | | | | | SWD_SWCLK | +#define PA15 15 // | 15 | | | | SPI3_SS, (SPI1_SS) | | +// |---------|--------|-----------|----------|------------------------|-----------| +#define PB0 16 // | 16 | A8 | | | | | +#define PB1 17 // | 17 | A9 | | | | | +#define PB2 18 // | 18 | | | | | BOOT1 | +#define PB3 19 // | 19 | | | TWI2_SDA | SPI3_SCK, (SPI1_SCK) | | +#define PB4 20 // | 20 | | | TWI3_SDA | SPI3_MISO, (SPI1_MISO) | | +#define PB5 21 // | 21 | | | | SPI3_MOSI, (SPI1_MOSI) | | +#define PB6 22 // | 22 | | USART1_TX | TWI1_SCL | | | +#define PB7 23 // | 23 | | USART1_RX | TWI1_SDA | | | +#define PB8 24 // | 24 | | | TWI1_SCL | | | +#define PB9 25 // | 25 | | | TWI1_SDA | SPI2_SS | | +#define PB10 26 // | 26 | | | TWI2_SCL | SPI2_SCK | | +#define PB12 27 // | 27 | | | | SPI2_SS | | +#define PB13 28 // | 28 | | | | SPI2_SCK | | +#define PB14 29 // | 29 | | | | SPI2_MISO | | +#define PB15 30 // | 30 | | | | SPI2_MOSI | | +// |---------|--------|-----------|----------|------------------------|-----------| +#define PC0 31 // | 31 | A10 | | | | | +#define PC1 32 // | 32 | A11 | | | | | +#define PC2 33 // | 33 | A12 | | | SPI2_MISO | | +#define PC3 34 // | 34 | A13 | | | SPI2_MOSI | | +#define PC4 35 // | 35 | A14 | | | | | +#define PC5 36 // | 36 | A15 | | | | | +#define PC6 37 // | 37 | | USART6_TX | | | | +#define PC7 38 // | 38 | | USART6_RX | | | | +#define PC8 39 // | 39 | | | | | | +#define PC9 40 // | 40 | | | TWI3_SDA | | | +#define PC10 41 // | 41 | | | | SPI3_SCK | | +#define PC11 42 // | 42 | | | | SPI3_MISO | | +#define PC12 43 // | 43 | | | | SPI3_MOSI | | +#define PC13 44 // | 44 | | | | | | +#define PC14 45 // | 45 | | | | | OSC32_IN | +#define PC15 46 // | 46 | | | | | OSC32_OUT | +// |---------|--------|-----------|----------|------------------------|-----------| +#define PD2 47 // | 47 | | | | | | +// |---------|--------|-----------|----------|------------------------|-----------| +#define PH0 48 // | 48 | | | | | OSC_IN | +#define PH1 49 // | 49 | | | | | OSC_OUT | +// |---------|--------|-----------|----------|------------------------|-----------| + +// This must be a literal +#define NUM_DIGITAL_PINS 50 +#define NUM_ANALOG_INPUTS 16 + +// SPI definitions +#define PIN_SPI_SS PA4 +#define PIN_SPI_SS1 PA4 +#define PIN_SPI_MOSI PA7 +#define PIN_SPI_MISO PA6 +#define PIN_SPI_SCK PA5 + + +// Timer Definitions +#define TIMER_TONE TIM2 +#define TIMER_SERVO TIM11 +#define TIMER_SERIAL TIM5 + +// UART Definitions +//#define ENABLE_HWSERIAL1 done automatically by the #define SERIAL_UART_INSTANCE below +#define ENABLE_HWSERIAL2 + + +// Define here Serial instance number to map on Serial generic name (if not already used by SerialUSB) +#define SERIAL_UART_INSTANCE 1 //1 for Serial = Serial1 (USART1) + +// Default pin used for 'Serial' instance +// Mandatory for Firmata +#define PIN_SERIAL_RX PA10 +#define PIN_SERIAL_TX PA9 + +// Used when user instanciate a hardware Serial using its peripheral name. +// Example: HardwareSerial mySerial(USART3); +// will use PIN_SERIAL3_RX and PIN_SERIAL3_TX if defined. +#define PIN_SERIAL1_RX PA10 +#define PIN_SERIAL1_TX PA9 +#define PIN_SERIAL2_RX PA3 +#define PIN_SERIAL2_TX PA2 + +#ifdef __cplusplus +} // extern "C" +#endif +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #define SERIAL_PORT_MONITOR Serial + #define SERIAL_PORT_HARDWARE Serial1 + #define SERIAL_PORT_HARDWARE_OPEN Serial2 +#endif + +#endif /* _VARIANT_ARDUINO_STM32_ */ diff --git a/ini/features.ini b/ini/features.ini index 6a77c11c1238..e0f6254d08de 100644 --- a/ini/features.ini +++ b/ini/features.ini @@ -206,6 +206,7 @@ CONTROLLER_FAN_EDITABLE = src_filter=+ GCODE_MACROS = src_filter=+ GRADIENT_MIX = src_filter=+ +OTA_FIRMWARE_UPDATE = src_filter=+ HAS_SAVED_POSITIONS = src_filter=+ + PARK_HEAD_ON_PAUSE = src_filter=+ FILAMENT_LOAD_UNLOAD_GCODES = src_filter=+