This English readme may not be up to date with the Chinese version.

ExistOS-For-HP39GII

An open source HP39GII firmware project

Project Overview

This firmware project is created by a group of calculator enthusiasts, using libraries such as FreeRTOS kernel, TinyUSB, FatFs, dhara, giac, etc. Like-minded friends are more than welcome to try out and improve the code of this project. We'd love to hear your voices!

	User Guide
Current Development Status		Experimental Fautures
	Install Guide
For Win10/11	ExistOS Updater	Automated tools for beginers
Win/Linux	OS Loader & EDB
Windows	Emulator
	Usage
Setup	Shortcuts	Accessing Internal Storage
Basic Usage of KhiCAS	Basic Calculations	Example 1: Plotting
	Example 2: Indefinite Integrals	Example 3: Definite Integrals
	Example 4: Programming to draw Feigenbaum bifurcation diagrams mapped with Logistic equations
**Experimental Features	Charging	Emu48 39/48 Emulator
Uninstalling and Flashing Back	Contributors	License

	Developer Guide
Current Development Status		Experimental Fautures
	Comiling and Installing
Preparations	Compiling ExistOS	Flash firmware
	Code contribution
Documents (To do)	Third-party App developing	Code submision standard
Uninstalling and Flashing Back	Contributors	License

Current Developping Status

Boot
Serial debugging
LCD driver supporting 256 shades of grey
STMP3770 interrupt controller
Keyboard driver (GPIO polling)
Timer driver
Setting CPU frequency
Real-time clock
USB mass storage device mode
USB serial console
USB keyboard & mouse emulation
USB functions dynamic configuration
Flash driver
FATFS implementation
Multitasking
Virtual memory
Loading applications
Miminal MicroPython implementation
Graphical user interface
Basic power management
Complete power management
Firmware updating independent of stock tools

Experimental features

Charging Ni-Mh batteries in the compartment via USB power
Running hp39g firmware with Saturn emulator
Running hp48g firmware with Saturn emulator

Current development status is as described above. User interface etc. are still under discussion. You may open an issue to give your opinion.

Only Installing

For Windows 10 / 11: ExistOS Updater

Requires:

Firmware: Download from here.
- Download OSLoader.sb and ExistOS.sys.
ExistOS Updater: Download from here.
- Only supports Windows 10 / 11.

For Windows / Linux

Requires:

Firmware: Download from here.
- Download OSLoader.sb and ExistOS.sys.
sb_loader: Used to send OSLoader to the RAM of your calculator if you haven't installed it before.
- Windows: Download binary file from here.
- Linux: Download zip file from here and extract it. Then run the following commands:
  - cd tools/sbtools/
  - make
  - Then you will get executable file sb_loader
EDB (ExistOS Debug Brige): Used to flash firmwares.
- Windows: Download binary file from here.
- Linux: Download zip file from here and extract it. Then run the following commands:
  - mkdir build
  - cmake -B build
  - cmake --build build
  - Then you will get the executable file edb

Put the mentioned files to a directory.

If you haven't installed ExistOS on your calculotor, please get through the to-do list below first:

Remove all batteries from your calculator.
Hold ON/C key and connect your calculator to computer via USB cable.
Run command sbloader -f OSLoader.sb

Normally your calculator will boot into the OSLoader, and then a message will be shown on the screen. There is no need to unplug the USB cable now. Just continue to do the following steps.

The ExistOS had been installed on your device:

Connect your calculator to computer via USB cable.
Run command edb -r -s -f OSLoader.sb 1408 b to flash the OSLoader.

Your calculator will reboot automatically.

Run command edb -r -s -f ExistOS.sys 1984 to flash the System.

Your calculatr will reboot automatically.

Enjoy the ExistOS!

If you are in trouble with the installation or anything else, open an issue or join our Discord server to seek for help.

Compiling and Installing

Preparations

Clone the git repo first:

git clone https://github.com/ExistOS-Team/ExistOS-For-HP39GII.git # https
git clone git@github.com:ExistOS-Team/ExistOS-For-HP39GII.git # ssh

Then enter the directory:

cd ExistOS-For-HP39GII

Switch to the root directory of this project first.

Note:

gcc-arm-none-eabi v10.3 is tested OK. Download binary executable file from here.
- Using other versions of GCC may make the device unable to boot.

System	Install
Windows	Download from here and install `gcc-arm-none-eabi`
	Do not forget to add directory to the PATH environment variable
Debian & Ubuntu	`apt-get install gcc-arm-none-eabi`
Arch Linux	`pacman -Syu arm-none-eabi-gcc`
Other	Lookup if there are binary packages provided. Or you can build from source code
	The link above is the new version. You can download the old version (V10.3) form here

Add udev rule:

System	Install
Windows	N/A
Linux	`sudo cp 99-hp39gii.rules /etc/udev/rules.d/`
	Then restart `udev` to load new rule:
	`sudo service udev restart`
	If command above didn't work:
	`sudo udevadm control --reload-rules`
	`sudo udevadm trigger`

Install compiler:

System	Install
Windows	Download binary executable of Ninja, exract it to a directory in your PATH
Debian & Ubuntu	`apt-get install cmake make`
Arch Linux	`pacman -Syu cmake make`

Install requirements:

System	Install
Windows	N/A
Debian	`apt-get install libcrypto++-dev libusb-1.0.0-dev`
Ubuntu	`apt-get install libcrypto++6 libcrypto++-dev libusb-1.0.0-dev`
Arch Linux	`pacman -Syu libusb crypto++`
Other	Install libusb 1.0, libcrypto++
	Check installtion with `pkg-config`

Tips: pkg-config will search /usr/lib/pkgconfig/*.pc for libraries.

Build sbtool:

System	Install
Windows	Binary executable in `tools/`
Linux	`cd tools/sbtools/ && make`
	`cp sb_loader ../`
	`cp elftosb ../`
	`cd ../../`
	`cd Libs/src/micropython-master/ports/eoslib/ && make`
	`cd ../../../../../`

Build EDB:

System	Install
Windows	Binary executable in `tools/`
Linux	`cd tools/`
	`git clone https://github.com/ExistOS-Team/edb-unix.git`
	`cd edb-unix/`
	`mkdir build`
	`cmake -B build/`
	`cmake --build build/`
	`cp build/edb ../`
	`cd ../../`

Build sys_signer:

System	Install
Windows	Binary executable in `tools/`
Linux	`cd tools/sys_signer/`
	`mkdir build`
	`cmake -B build/`
	`cmake --build build/`
	`cp build/sys_signer ../`
	`cd ../../`

Compiling ExistOS

Create a new directory to store binary files and caches

mkdir build
cd build

Preparing to compile:

System	Install	Note
Windows	`cmake .. -G Ninja`	Assumed `Ninja` as complier
Linux	`cmake ..`

Compiling:

System	Install
Windows	`ninja`
Linux	`make`

Installing

Note: Please install drivers for HP39GII by yourself.

OSLoader in RAM (temporarily)

You can skip this step if the OSLoader had been installed on your device.

The OSLoader can boot ExistOS and provides low-level APIs and virtual memory service. Run commands below to load the OSLoader temporarily.

Before flashing, power off your calculator completely by removing the batteries, and then plug in USB cable while holding down the ON/C key. Then your calculator will enter the flashing mode.

An HID device named "USB Input Device" with the ID of 066F:3770 will show up in the Device Manager under Windows.

System	Install
Windows	`ninja sb_flash`
Linux	`make sb_flash`

OSLoader

System	Install
Windows	`ninja edb_flash_loader`
Linux	`make edb_flash_loader`

This will flash OSLoader to the calculator.

Your calculator will reboot automatically.

ExistOS

System	Install
Windows	`ninja edb_flash_sys`
Linux	`make edb_flash_sys`

This will install ExistOS on your calculator.

Your calculator will reboot automatically.

Emulator

Download form here.

Basic Usage of the Firmware

Booting for the first time

During the first boot after the installation you will see the following dialog, prompting you to format the data section of the flash as FAT16. Press ENTER to confirm the operation, which usually takes around 30 seconds.

This screen indicates a successful format. Select OK to enter the main menu.

This system only comes with a KhiCAS application for now. Press ← → ↑ ↓ to navigate and ENTER to confirm.

The status tab currently shows the system status.

Shortcuts

ON + F5: Enter the maintenance menu

ON + [+] / [-]: Adjust the contrast

Accessing internal storage

Holding down the F2 key while booting (or immediately after pressing the ON/C key) will bring up the following interface:

An 80 MB USB drive, the data section of the onboard flash, will show up on your computer. The System directory stores the assets, for example, fonts and pictures (Unused right now). The xcas directory stores KhiCAS user scripts, sessions (history) and other datas.

Basic usage of KhiCAS

Press ↓ to select the KhiCAS app under the Application tab in the main menu, and press ENTER to launch it. A dialog will show up on the first launch, which is for you to choose between Xcas mode F1 and Python mode F6.

After the configurations, the current status is shown on the status bar below. The first item is the current time, the second is the mode (Xcas or Python), the third is the filename of the current session.

Use time(hh, mm) to set the time.

Calculations can be performed after initialization.

Long press the ON/C key to clear the history.

Press SHIFT + ON/C to save the session and quit KhiCAS.

Basic calculations

General expressions can be entered in KhiCAS to perform calculations. Calculation of large integers is supported. However for floating point calculation, only single-percision floating point numbers calculation is supported.

For an expression entered in linear mode, select View (F3) to edit it in the natural textbook editor.

Press F1 and F2 to bring up could-be commonly-used commands menu.

The cmds menu (F4) lists all available commands in KhiCAS as nested entries, including algebraic, complex, polynominal, probability, plotting, etc., where you can search commands needed. After selecting the command, press Input to copy them to the main menu, ex1 ex2 to copy built-in examples or help to show built-in help.

Example 1: Plotting

Use plot command to plot functions. In the plot interface: Press ↑ ↓ ← → to move the canvas, +``- to zoom, * to auto-zoom and fill the screen, / to auto-zoom and keep the scale of the axes equal.

  plot(expression, x)
  plot(expression, x=[start...end], xstep=step)

plotpolar command plots in polar coordinate system.

plotfield command draws vector fields.

Example 2: Indefinite integrals

Example 3: Definite integrals

Example 4: Programming to draw Feigenbaum bifurcation diagrams mapped with Logistic equations

Two input syntax modes are present in KhiCAS, namely Xcas and Python. With the ability to execute scripts, new functions can be defined via programming. Here we use Python syntax to implement the following bifurcation diagram.

Press File (F6) in the main menu and select the 6th item to open the script editor.

In the editor, the top left corner shows current time, syntax mode, filename and current line/total lines. F1~F3 stores shortcut commands such as symbolic conditionals, loop bodies, function definitions, etc.

The script we are using is as follows. First we define two global vectors r and p, where the result of function f iteration will be stored. Then we can plot by calling KhiCAS command point(r,p) externally.

r = []
p = []
def f():
  for u in range(0, 40):
    x = 0.132456
    for n in range(1,50):
      x1 = (u/10)*x*(1-x)
      x = x1
      if n > 25:
        r.append(u/100)
        p.append(x)
  return

After editing, the script can be checked and compiled using the Check syntax option in the File menu, and the result will be output to the console.

The following figure shows the result of compiling a script with a symbolic error, with a specific indication of the line number. (Compiling Python scripts in Xcas mode also causes error.)

The result of a successful compilation is shown below.

The function name in the script is called to execute the function written above, and the point command is then called to draw the scattered data to the canvas.

Final output:

About Experimental Features

Charging (Untested)

Emu48 39/48 Emulator

Put rom.g39 (1MB size) to the root directory of calculator storage, then click Emu48 from the menu of ExistOS.

It is still unsupport to save data or escape from emulator unless reboot your calculator.

Uninstalling ExistOS and Flashing Back to the HP Firmware

You need to erase the whole flash before flashing back to the HP Firmware, otherwise you'll get stuck at the formatting progress when using the official update tool.

How to erase the whole flash:
After flashing OSLoader or while ExistOS is running, press ON+F5 to enter the maintenance menu, and then press F2 to erase the flash. This operation cannot be undone. When the screen shows "Flash Cleared", connect the calculator to a computer and launch the official update tool under 7 / XP to flash your calculator back to the HP firmware.

Third-party App Developing

ExistOS APP Demo Repo:

https://github.com/ExistOS-Team/ExistOS-App-demo

Code Submission Standard

If you want to contribute to this project, please follow the standards below

Variable
- Variables are named using lower camel case. For example, windowHeight
- Function parameter naming is the same as variable.
- Don't name using a single letter except for temporary or loop variable.
- It is prefered to add some meaningful prefix. For example, p means pointer.
- Don't define variable and pointer at the same time on one line, such as char *p, q;
Function
- Functions are named using underline. For example, get_window_width。
- Function names should follow the Verb - object relationship.
- It is prefered to add some meaningful prefix. For example, is means the type of return value is bool.
- Short function can be defined as inline, function parameters and return values should be pointer instead of variable.
- Avoid using recursion, consider refactoring to cycling.
Constant, macro and hardware-related
- Constants and macros are named using underline to divide upper-case letters. For example, MAX_WIDTH。
Custom type
- Custom type names are named using underline (tentative).
- Must use typedef to define a custom type before using struct to define non-single-instance object.
Operator and other symbol
- Unary operators should appress the variable, such as c++, *p.
- Binary operators shold have spaces on both sides, such as i == 1, a += 3, except for ->
- Ternary are the same as binary, such as isLeft ? 1 : 0.
- commas should be followed by a space.
- Parentheses should be added appropriately where it is not easy to understand.
Pseudo-class

If object-oriented is necessary, you can consider using typedef struct as pseudo-class.
- Pseudo classes should be named by the upper camel case (Pascal) name.
- For properties inside the class, its name is the same as the general variable.
- Pseudo-class methods are not saved in pseudo-classes, but are global functions. Methods should be named using underline.
  - Normal method should be named as ClassName_method_name, the first parameter should always be a pointer to the instance and be named this (even unnecessary).
  - Static method should be named asClassName_static_method_name。
  - General method named ClassName_initializer should be called right after an instance is defined.

Coding

7.1

if (a == 1) {                          // There should be spaces between keywords and brackets, and spaces between brackets and curly brackets
    // code here
}else{                                 // Use Java style
    // code here
}
if (b == 1) return;                    // When there is only one sentence of code in the block, you can leave a blank space without curly braces

7.2

while (true)
    ;                                  // When using empty loops, you should wrap the semicolon and indent it

7.3

(a) The loop variable of a general for loop is defined in the for loop:

    for (int i = 0; i < l; i++) {
        // code here
    }

(b) In cases where circular variables are used externally, an initial value should also be given here:

    int i;
    for (i = 0; i < l; i++) {
            // code here
    }
    return i;

(c) Do not leave any of the three of for loops empty: for ( ; ; ), otherwise use the while loop.

7.4 Don't use assignment where a sentence needs to be judged, such as if (a = 1), (a = 1) ? a : 0 .

7.5 The goto statement should be avoided as much as possible.

7.6 Switch should be used more than else if.In a switch statement, it is best to have a break/return statement in each case, except when multiple cases share exactly the same piece of code.Care should be taken when using switch traversal and it is best to comment on it.

For VSCode users, clang-format extension is available to format the code conveniently.

Contributors

Special thanks to:

parisseb

License

GPL-3.0

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README_en.md

README_en.md

ExistOS-For-HP39GII

Project Overview

Contents

Current Developping Status

Experimental features

Only Installing

For Windows 10 / 11: ExistOS Updater

For Windows / Linux

Compiling and Installing

Preparations

Compiling ExistOS

Installing

OSLoader in RAM (temporarily)

OSLoader

ExistOS

Emulator

Basic Usage of the Firmware

Booting for the first time

Shortcuts

Accessing internal storage

Basic usage of KhiCAS

Basic calculations

Example 1: Plotting

Example 2: Indefinite integrals

Example 3: Definite integrals

Example 4: Programming to draw Feigenbaum bifurcation diagrams mapped with Logistic equations

About Experimental Features

Charging (Untested)

Emu48 39/48 Emulator

Uninstalling ExistOS and Flashing Back to the HP Firmware

Third-party App Developing

Code Submission Standard

Contributors

License

Files

README_en.md

Latest commit

History

README_en.md

File metadata and controls

ExistOS-For-HP39GII

Project Overview

Contents

Current Developping Status

Experimental features

Only Installing

For Windows 10 / 11: ExistOS Updater

For Windows / Linux

Compiling and Installing

Preparations

Compiling ExistOS

Installing

OSLoader in RAM (temporarily)

OSLoader

ExistOS

Emulator

Basic Usage of the Firmware

Booting for the first time

Shortcuts

Accessing internal storage

Basic usage of KhiCAS

Basic calculations

Example 1: Plotting

Example 2: Indefinite integrals

Example 3: Definite integrals

Example 4: Programming to draw Feigenbaum bifurcation diagrams mapped with Logistic equations

About Experimental Features

Charging (Untested)

Emu48 39/48 Emulator

Uninstalling ExistOS and Flashing Back to the HP Firmware

Third-party App Developing

Code Submission Standard

Contributors

License