From e50e8bf8b812ace3ee878700aa79ee4cbcf195f2 Mon Sep 17 00:00:00 2001
From: Doc Walker <4-20ma@wvfans.net>
Date: Tue, 13 Sep 2016 05:18:33 -0500
Subject: [PATCH] Fix #73 reorder installation section of README

---
 README.md | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/README.md b/README.md
index 8a3ad2a..9c17918 100755
--- a/README.md
+++ b/README.md
@@ -36,14 +36,6 @@ Registers
 Both full-duplex and half-duplex RS232/485 transceivers are supported. Callback functions are provided to toggle Data Enable (DE) and Receiver Enable (/RE) pins.
 
 
-## Uploading Sketches
-Arduinos prior to the Mega have one serial port which must be connected to USB (FTDI) for uploading sketches and to the RS232/485 device/network for running sketches. You will need to disconnect pin 0 (RX) while uploading sketches. After a successful upload, you can reconnect pin 0.
-
-
-## Hardware
-This library has been tested with an Arduino [Duemilanove](http://www.arduino.cc/en/Main/ArduinoBoardDuemilanove), PHOENIX CONTACT [nanoLine](https://www.phoenixcontact.com/online/portal/us?1dmy&urile=wcm%3apath%3a/usen/web/main/products/subcategory_pages/standard_logic_modules_p-21-03-03/3329dd38-7c6a-46e1-8260-b9208235d6fe/3329dd38-7c6a-46e1-8260-b9208235d6fe) controller, connected via RS485 using a Maxim [MAX488EPA](http://www.maxim-ic.com/quick_view2.cfm/qv_pk/1111) transceiver.
-
-
 ## Installation
 
 #### Library Manager
@@ -60,6 +52,14 @@ Refer to Arduino Tutorials > Libraries [Importing a .zip Library](https://www.ar
 Refer to Arduino Tutorials > Libraries [Manual Installation](https://www.arduino.cc/en/Guide/Libraries#toc5).
 
 
+## Hardware
+This library has been tested with an Arduino [Duemilanove](http://www.arduino.cc/en/Main/ArduinoBoardDuemilanove), PHOENIX CONTACT [nanoLine](https://www.phoenixcontact.com/online/portal/us?1dmy&urile=wcm%3apath%3a/usen/web/main/products/subcategory_pages/standard_logic_modules_p-21-03-03/3329dd38-7c6a-46e1-8260-b9208235d6fe/3329dd38-7c6a-46e1-8260-b9208235d6fe) controller, connected via RS485 using a Maxim [MAX488EPA](http://www.maxim-ic.com/quick_view2.cfm/qv_pk/1111) transceiver.
+
+
+## Caveats
+Arduinos prior to the Mega have one serial port which must be connected to USB (FTDI) for uploading sketches and to the RS232/485 device/network for running sketches. You will need to disconnect pin 0 (RX) while uploading sketches. After a successful upload, you can reconnect pin 0.
+
+
 ## Support
 Please [submit an issue](https://github.com/4-20ma/ModbusMaster/issues) for all questions, bug reports, and feature requests. Email requests will be politely redirected to the issue tracker so others may contribute to the discussion and requestors get a more timely response.