diff --git a/keyboards/3araht/giabalanai/config.h b/keyboards/3araht/giabalanai/config.h
new file mode 100644
index 000000000000..b79935b9a3c2
--- /dev/null
+++ b/keyboards/3araht/giabalanai/config.h
@@ -0,0 +1,257 @@
+/*
+Copyright 2020 3araht
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see .
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0000
+#define DEVICE_VER 0x0001
+#define MANUFACTURER 3araht
+#define PRODUCT giabalanai
+
+/* key matrix size */
+#define MATRIX_ROWS 12
+#define MATRIX_COLS 10
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+// #define MATRIX_ROW_PINS { D1, D0, D4, C6, D7, E6 }
+// #define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, B4, B5 }
+#define MATRIX_ROW_PINS { B5, B4, E6, D7, C6, D4 }
+#define MATRIX_COL_PINS { B1, F7, F6, F5, F4, B3, B2, B6, D0, D1 }
+#define MATRIX_ROW_PINS_RIGHT { D1, D0, D4, C6, D7, E6 }
+// F1 is an unused dummy pin to match the # of COLs used. B5 will be used for Audio.
+// B7, C7 are unused dummy pin to match the # of COLs used. B6, B4 will be used for Encoder.
+// #define MATRIX_COL_PINS_RIGHT { F4, F5, F6, F7, B1, B3, B2, B6, B4, F1 }
+#define MATRIX_COL_PINS_RIGHT { F4, F5, F6, F7, B1, B3, B2, C7, B7, F1 }
+// #define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D2
+#define SELECT_SOFT_SERIAL_SPEED 1
+/*Sets the protocol speed when using serial communication*/
+//Speeds:
+//0: about 189kbps (Experimental only)
+//1: about 137kbps (default)
+//2: about 75kbps
+//3: about 39kbps
+//4: about 26kbps
+//5: about 20kbps
+
+// Right side has to be the master since 1, LED data is output from right side, and 2, Audio pin is prepared on right side as a reserve.
+#define MASTER_RIGHT
+
+
+//#define BACKLIGHT_PIN B7
+//#define BACKLIGHT_LEVELS 3
+//#define BACKLIGHT_BREATHING
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+
+#ifdef RGBLIGHT_ENABLE
+
+ #define RGBLED_NUM 123
+ // Do not define "RGBLED_SPLIT" since the # of LEDs on both sides are not equal.
+ // Instead, LED data is tranferred from right side to the left via TRRS cable.
+
+ #define RGBLIGHT_LIMIT_VAL 100
+ // #define RGBLIGHT_LAYERS
+
+ #ifndef HSV_BLACK
+ #define HSV_BLACK 0, 0, 0 // Define 'black' color, more like 'LED off' (H, S, V)
+ #endif
+
+ /* All the animations have to be disabled so as not to overwrite the LED setting when keys are pressed. */
+ // #ifndef AUDIO_ENABLE
+ // #define RGBLIGHT_EFFECT_KNIGHT
+ // #define RGBLIGHT_EFFECT_KNIGHT_LED_NUM 15
+ // #define RGBLIGHT_EFFECT_KNIGHT_OFFSET 60
+ // #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+ // #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+ // #endif
+
+ // These two effects consume 1334 bytes.
+ // #define RGBLIGHT_EFFECT_TWINKLE
+ // #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+
+
+// RGBLIGHT LED MAP
+// Right 1st row (12 LEDs)
+// ENCODER
+// Right 2nd .. 5th row(13, 12, 13, 12 LEDs)
+// Left 1st .. 5th row (12 LEDs x 5 rows)
+
+ #define RGBLIGHT_LED_MAP { \
+ 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, \
+ 97, \
+ 84, 83, 82, 81, 80, 79, 78, 77, 76, 75, 74, 73, 72, \
+ 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, \
+ 110, 109, 108, 107, 106, 105, 104, 103, 102, 101, 100, 99, 98, \
+ 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, \
+ \
+ 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0, \
+ 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, \
+ 35, 34, 33, 32, 31, 30, 29, 28, 27, 26, 25, 24, \
+ 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, \
+ 59, 58, 57, 56, 55, 54, 53, 52, 51, 50, 49, 48 \
+ }
+
+ // #define RGBLIGHT_LED_MAP {
+ // 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11,
+ // 12,
+ // 25, 24, 23, 22, 21, 20, 19, 18, 17, 16, 15, 14, 13,
+ // 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37,
+ // 50, 49, 48, 47, 46, 45, 44, 43, 42, 41, 40, 39, 38,
+ // 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62,
+ //
+ // 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74,
+ // 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86,
+ // 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98,
+ // 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110,
+ // 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122
+ // }
+
+
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+// /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+// #define LOCKING_SUPPORT_ENABLE
+// /* Locking resynchronize hack */
+// #define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0
+
+/* Audio */
+#ifdef AUDIO_ENABLE
+ #define B5_AUDIO // use EX1 = PB5 = PIN9 as Audio output
+ // #define DAC_SAMPLE_MAX 32768U
+ #define DAC_SAMPLE_MAX 65535U
+ // #define AUDIO_CLICKY
+ #define NO_MUSIC_MODE
+ // #define STARTUP_SONG SONG(FANTASIE_IMPROMPTU)
+ // #define STARTUP_SONG SONG(NOCTURNE_OP_9_NO_1)
+ // #define STARTUP_SONG SONG(USSR_ANTHEM)
+ // #define STARTUP_SONG SONG(CAMPANELLA)
+
+#endif
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+ - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+ - MIDI notes can be added to the keymap
+ - Octave shift and transpose
+ - Virtual sustain, portamento, and modulation wheel
+ - etc.
+*/
+#define MIDI_ADVANCED
+#define MIDI_TONE_KEYCODE_OCTAVES 5
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * Encoder options
+ */
+#ifdef ENCODER_ENABLE
+ #define ENCODERS_PAD_A { C7 } // dummy
+ #define ENCODERS_PAD_B { B7 } // dummy
+ #define ENCODERS_PAD_A_RIGHT { B4 }
+ #define ENCODERS_PAD_B_RIGHT { B6 }
+ #define ENCODER_RESOLUTION 4
+ #define TAP_CODE_DELAY 10
+#endif // ENCODER_ENABLE
diff --git a/keyboards/3araht/giabalanai/giabalanai.c b/keyboards/3araht/giabalanai/giabalanai.c
new file mode 100644
index 000000000000..0cff59574350
--- /dev/null
+++ b/keyboards/3araht/giabalanai/giabalanai.c
@@ -0,0 +1,24 @@
+/* Copyright 2020 3araht
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+#include "giabalanai.h"
+#include "encoder.h"
+
+#ifdef ENCODER_ENABLE
+void encoder_update_kb(int8_t index, bool clockwise) {
+ encoder_update_user(index, clockwise);
+}
+#endif //ENCODER_ENABLE
diff --git a/keyboards/3araht/giabalanai/giabalanai.h b/keyboards/3araht/giabalanai/giabalanai.h
new file mode 100644
index 000000000000..2df7c700e9c5
--- /dev/null
+++ b/keyboards/3araht/giabalanai/giabalanai.h
@@ -0,0 +1,59 @@
+/* Copyright 2020 3araht
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+ l00, l01, l02, l03, l04, l05, \
+ l10, l11, l12, l13, l14, l15, \
+ l20, l21, l22, l23, l24, l25, \
+ l30, l31, l32, l33, l34, l35, \
+ l40, l41, l42, l43, l44, l45, \
+ \
+ l06, l07, l08, l09, l0a, l0b, \
+ l16, l17, l18, l19, l1a, l1b, \
+ l26, l27, l28, l29, l2a, l2b, \
+ l36, l37, l38, l39, l3a, l3b, \
+ l46, l47, l48, l49, l4a, l4b, \
+ \
+ r00, r01, r02, r03, r04, r05, r06, r07, r08, r09, r0a, r0b, renc, \
+ r10, r11, r12, r13, r14, r15, r16, r17, r18, r19, r1a, r1b, r1c, \
+ r20, r21, r22, r23, r24, r25, r26, r27, r28, r29, r2a, r2b, r2c \
+) { \
+ { l00, l10, l20, l30, l40, l0b, l1b, l2b, l3b, l4b }, \
+ { l01, l11, l21, l31, l41, l0a, l1a, l2a, l3a, l4a }, \
+ { l02, l12, l22, l32, l42, l09, l19, l29, l39, l49 }, \
+ { l03, l13, l23, l33, l43, l08, l18, l28, l38, l48 }, \
+ { l04, l14, l24, l34, l44, l07, l17, l27, l37, l47 }, \
+ { l05, l15, l25, l35, l45, l06, l16, l26, l36, l46 }, \
+ \
+ { r00, r01, r02, r03, r04, r05, r06, KC_NO, KC_NO, KC_NO }, \
+ { r10, r11, r12, r13, r14, r15, r16, KC_NO, KC_NO, KC_NO }, \
+ { r20, r21, r22, r23, r24, r25, r26, KC_NO, KC_NO, KC_NO }, \
+ { KC_NO, renc, r0b, r0a, r09, r08, r07, KC_NO, KC_NO, KC_NO }, \
+ { KC_NO, r1c, r1b, r1a, r19, r18, r17, KC_NO, KC_NO, KC_NO }, \
+ { KC_NO, r2c, r2b, r2a, r29, r28, r27, KC_NO, KC_NO, KC_NO } \
+}
diff --git a/keyboards/3araht/giabalanai/info.json b/keyboards/3araht/giabalanai/info.json
new file mode 100644
index 000000000000..bdac932d5055
--- /dev/null
+++ b/keyboards/3araht/giabalanai/info.json
@@ -0,0 +1,19 @@
+{
+ "keyboard_name": "giabalanai",
+ "url": "",
+ "maintainer": "3araht",
+ "width": 3,
+ "height": 2,
+ "layouts": {
+ "LAYOUT": {
+ "layout": [
+ {"label": "k00", "x": 0, "y": 0},
+ {"label": "k01", "x": 1, "y": 0},
+ {"label": "k02", "x": 2, "y": 0},
+
+ {"label": "k10", "x": 0, "y": 1, "w": 1.5},
+ {"label": "k12", "x": 1.5, "y": 1, "w": 1.5}
+ ]
+ }
+ }
+}
diff --git a/keyboards/3araht/giabalanai/keymaps/default/keymap.c b/keyboards/3araht/giabalanai/keymaps/default/keymap.c
new file mode 100644
index 000000000000..04544eb9d037
--- /dev/null
+++ b/keyboards/3araht/giabalanai/keymaps/default/keymap.c
@@ -0,0 +1,389 @@
+/* Copyright 2020 3araht
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+#include QMK_KEYBOARD_H
+
+// Alias layout macros that expand groups of keys.
+#define LAYOUT_wrapper(...) LAYOUT(__VA_ARGS__)
+
+#define _________________QWERTY_L1_________________ KC_Q, KC_W, KC_E, KC_R, KC_T
+#define _________________QWERTY_L2_________________ KC_A, KC_S, KC_D, KC_F, KC_G
+#define _________________QWERTY_L3_________________ KC_Z, KC_X, KC_C, KC_V, KC_B
+
+#define _________________QWERTY_R1_________________ KC_Y, KC_U, KC_I, KC_O, KC_P
+#define _________________QWERTY_R2_________________ KC_H, KC_J, KC_K, KC_L, KC_SCLN
+#define _________________QWERTY_R3_________________ KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH
+
+#define _________________COLEMAK_L1________________ KC_Q, KC_W, KC_F, KC_P, KC_G
+#define _________________COLEMAK_L2________________ KC_A, KC_R, KC_S, KC_T, KC_D
+#define _________________COLEMAK_L3________________ KC_Z, KC_X, KC_C, KC_V, KC_B
+
+#define _________________COLEMAK_R1________________ KC_J, KC_L, KC_U, KC_Y, KC_SCLN
+#define _________________COLEMAK_R2________________ KC_H, KC_N, KC_E, KC_I, KC_O
+#define _________________COLEMAK_R3________________ KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH
+
+#define _________________NUMBER_L__________________ KC_1, KC_2, KC_3, KC_4, KC_5
+#define _________________NUMBER_R__________________ KC_6, KC_7, KC_8, KC_9, KC_0
+
+#define DF_BASE DF(_BASE)
+#define DF_QWER DF(_QWERTY)
+// Long press: go to _FN layer, tap: MUTE
+#define FN_MUTE LT(_FN, KC_MUTE)
+
+#ifdef RGBLIGHT_ENABLE
+ //Following line allows macro to read current RGB settings
+ extern rgblight_config_t rgblight_config;
+ rgblight_config_t RGB_current_config;
+
+ // to indecate MUTE ON/OFF status with a LED.
+ bool myMUTEstat = false;
+
+ /* used to specify there is no LED on the keylocation. */
+ #define NO_LED 255
+
+ /* Conversion map from keylocation (MATRIX_ROWS x2(split) x MATRIX_COLS) to led IDs.
+ led IDs are the number starts "0" from upper left corner of left side,
+ enumerated from left to right, from top to bottom.
+ Then emumeration follows to the right side, starting from "60".
+
+ Note that the conversion from physical LED serial alighment to
+ the led IDs is done with RGBLIGHT_LED_MAP beforehand. */
+ const uint8_t PROGMEM convert_key_to_led[] =
+ {
+ 0, 12, 24, 36, 48, 11, 23, 35, 47, 59, \
+ 1, 13, 25, 37, 49, 10, 22, 34, 46, 58, \
+ 2, 14, 26, 38, 50, 9, 21, 33, 45, 57, \
+ 3, 15, 27, 39, 51, 8, 20, 32, 44, 56, \
+ 4, 16, 28, 40, 52, 7, 19, 31, 43, 55, \
+ 5, 17, 29, 41, 53, 6, 18, 30, 42, 54, \
+ \
+ 85, 86, 87, 88, 89, 90, 91, NO_LED, NO_LED, NO_LED, \
+ 98, 99, 100, 101, 102, 103, 104, NO_LED, NO_LED, NO_LED, \
+ NO_LED, 111, 112, 113, 114, 115, 116, NO_LED, NO_LED, NO_LED, \
+ NO_LED, 97, 96, 95, 94, 93, 92, NO_LED, NO_LED, NO_LED, \
+ NO_LED, 110, 109, 108, 107, 106, 105, NO_LED, NO_LED, NO_LED, \
+ NO_LED, 122, 121, 120, 119, 118, 117, NO_LED, NO_LED, NO_LED \
+ };
+
+ /* Top 2 rows on the right side (LED:60-84) are
+ duplicates of the bottom 2 rows (LED:85-122).
+ LED:97 = Encoder,
+ LED:110 don't have a duplicate on the top row,
+ LED:72 is used when r20 is pressed (not a duplicate) */
+ const uint8_t PROGMEM convert_key_to_led2[] =
+ {
+ NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, \
+ NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, \
+ NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, \
+ NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, \
+ NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, \
+ NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, \
+ \
+ NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, \
+ 60, 61, 62, 63, 64, 65, 66, NO_LED, NO_LED, NO_LED, \
+ 72, 73, 74, 75, 76, 77, 78, NO_LED, NO_LED, NO_LED, \
+ NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, \
+ NO_LED, NO_LED, 71, 70, 69, 68, 67, NO_LED, NO_LED, NO_LED, \
+ NO_LED, 84, 83, 82, 81, 80, 79, NO_LED, NO_LED, NO_LED \
+ };
+
+#endif
+
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+ _BASE, // MIDI
+ _QWERTY, // just in case
+ _FN
+};
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+
+ // MIDI Chord Keycodes - Root notes
+
+ MI_CH_Cr = SAFE_RANGE,
+ MI_CH_Csr,
+ MI_CH_Dbr = MI_CH_Csr,
+ MI_CH_Dr,
+ MI_CH_Dsr,
+ MI_CH_Ebr = MI_CH_Dsr,
+ MI_CH_Er,
+ MI_CH_Fr,
+ MI_CH_Fsr,
+ MI_CH_Gbr = MI_CH_Fsr,
+ MI_CH_Gr ,
+ MI_CH_Gsr,
+ MI_CH_Abr = MI_CH_Gsr,
+ MI_CH_Ar,
+ MI_CH_Asr,
+ MI_CH_Bbr = MI_CH_Asr,
+ MI_CH_Br,
+
+ // MIDI Chord Keycodes - Major
+
+ MI_CH_C,
+ MI_CH_Cs,
+ MI_CH_Db = MI_CH_Cs,
+ MI_CH_D,
+ MI_CH_Ds,
+ MI_CH_Eb = MI_CH_Ds,
+ MI_CH_E,
+ MI_CH_F,
+ MI_CH_Fs,
+ MI_CH_Gb = MI_CH_Fs,
+ MI_CH_G ,
+ MI_CH_Gs,
+ MI_CH_Ab = MI_CH_Gs,
+ MI_CH_A,
+ MI_CH_As,
+ MI_CH_Bb = MI_CH_As,
+ MI_CH_B,
+
+ // MIDI Chord Keycodes Minor
+
+ MI_CH_Cm,
+ MI_CH_Csm,
+ MI_CH_Dbm = MI_CH_Csm,
+ MI_CH_Dm,
+ MI_CH_Dsm,
+ MI_CH_Ebm = MI_CH_Dsm,
+ MI_CH_Em,
+ MI_CH_Fm,
+ MI_CH_Fsm,
+ MI_CH_Gbm = MI_CH_Fsm,
+ MI_CH_Gm,
+ MI_CH_Gsm,
+ MI_CH_Abm = MI_CH_Gsm,
+ MI_CH_Am,
+ MI_CH_Asm,
+ MI_CH_Bbm = MI_CH_Asm,
+ MI_CH_Bm,
+
+ //MIDI Chord Keycodes Dominant Seventh
+
+ MI_CH_CDom7,
+ MI_CH_CsDom7,
+ MI_CH_DbDom7 = MI_CH_CsDom7,
+ MI_CH_DDom7,
+ MI_CH_DsDom7,
+ MI_CH_EbDom7 = MI_CH_DsDom7,
+ MI_CH_EDom7,
+ MI_CH_FDom7,
+ MI_CH_FsDom7,
+ MI_CH_GbDom7 = MI_CH_FsDom7,
+ MI_CH_GDom7,
+ MI_CH_GsDom7,
+ MI_CH_AbDom7 = MI_CH_GsDom7,
+ MI_CH_ADom7,
+ MI_CH_AsDom7,
+ MI_CH_BbDom7 = MI_CH_AsDom7,
+ MI_CH_BDom7,
+
+ // MIDI Chord Keycodes Diminished Seventh
+
+ MI_CH_CDim7,
+ MI_CH_CsDim7,
+ MI_CH_DbDim7 = MI_CH_CsDim7,
+ MI_CH_DDim7,
+ MI_CH_DsDim7,
+ MI_CH_EbDim7 = MI_CH_DsDim7,
+ MI_CH_EDim7,
+ MI_CH_FDim7,
+ MI_CH_FsDim7,
+ MI_CH_GbDim7 = MI_CH_FsDim7,
+ MI_CH_GDim7,
+ MI_CH_GsDim7,
+ MI_CH_AbDim7 = MI_CH_GsDim7,
+ MI_CH_ADim7,
+ MI_CH_AsDim7,
+ MI_CH_BbDim7 = MI_CH_AsDim7,
+ MI_CH_BDim7,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Base */
+ [_BASE] = LAYOUT( \
+ MI_CH_Dbr, MI_CH_Abr, MI_CH_Ebr, MI_CH_Bbr, MI_CH_Fr, MI_CH_Cr, \
+ MI_CH_Db, MI_CH_Ab, MI_CH_Eb, MI_CH_Bb, MI_CH_F, MI_CH_C, \
+ MI_CH_Dbm, MI_CH_Abm, MI_CH_Ebm, MI_CH_Bbm, MI_CH_Fm, MI_CH_Cm, \
+ MI_CH_DbDom7, MI_CH_AbDom7, MI_CH_EbDom7, MI_CH_BbDom7, MI_CH_FDom7, MI_CH_CDom7, \
+ MI_CH_DbDim7, MI_CH_AbDim7, MI_CH_EbDim7, MI_CH_BbDim7, MI_CH_FDim7, MI_CH_CDim7, \
+ \
+ MI_CH_Gr, MI_CH_Dr, MI_CH_Ar, MI_CH_Er, MI_CH_Br, MI_CH_Fsr, \
+ MI_CH_G, MI_CH_D, MI_CH_A, MI_CH_E, MI_CH_B, MI_CH_Fs, \
+ MI_CH_Gm, MI_CH_Dm, MI_CH_Am, MI_CH_Em, MI_CH_Bm, MI_CH_Fsm, \
+ MI_CH_GDom7, MI_CH_DDom7, MI_CH_ADom7, MI_CH_EDom7, MI_CH_BDom7, MI_CH_FsDom7, \
+ MI_CH_GDim7, MI_CH_DDim7, MI_CH_ADim7, MI_CH_EDim7, MI_CH_BDim7, MI_CH_FsDim7, \
+ \
+ MI_Ab_2, MI_B_2, MI_D_3, MI_F_3, MI_Ab_3, MI_B_3, MI_D_4, MI_F_4, MI_Ab_4, MI_B_4, MI_D_5, MI_F_5, FN_MUTE, \
+ MI_G_2, MI_Bb_2, MI_Db_3, MI_E_3, MI_G_3, MI_Bb_3, MI_Db_4, MI_E_4, MI_G_4, MI_Bb_4, MI_Db_5, MI_E_5, MI_G_5, \
+ MI_Fs_2, MI_A_2, MI_C_3, MI_Eb_3, MI_Fs_3, MI_A_3, MI_C_4, MI_Eb_4, MI_Fs_4, MI_A_4, MI_C_5, MI_Eb_5, MI_Fs_5 \
+ ),
+
+ /* Fn */
+ [_QWERTY] = LAYOUT_wrapper( \
+ KC_GESC, _________________NUMBER_L__________________, \
+ KC_TAB, _________________QWERTY_L1_________________, \
+ KC_CAPS, _________________QWERTY_L2_________________, \
+ KC_LSFT, _________________QWERTY_L3_________________, \
+ KC_LCTL, KC_LGUI, KC_LALT, KC_LANG2, KC_SPC, KC_SPC, \
+ \
+ _________________NUMBER_R__________________, KC_BSPC, \
+ _________________QWERTY_R1_________________, KC_DEL, \
+ _________________QWERTY_R2_________________, KC_ENT, \
+ _________________QWERTY_R3_________________, KC_RSFT, \
+ KC_SPC, KC_SPC, KC_LANG1, KC_RALT, KC_RGUI, KC_RCTRL, \
+ \
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, \
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX \
+ ),
+
+ /* Fn */
+ [_FN] = LAYOUT( \
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+ \
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+ \
+ DF_BASE, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, \
+ DF_QWER, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX \
+ )
+};
+
+#ifdef RGBLIGHT_ENABLE
+ void keylight_manager(keyrecord_t *record, uint8_t hue, uint8_t sat, uint8_t val, uint8_t keylocation) {
+ if (keylocation == NO_LED) {
+ return; // do nothing.
+ }
+
+ if (record->event.pressed) {
+ rgblight_sethsv_at(hue, sat, val, keylocation);
+ }else{
+ rgblight_sethsv_at(HSV_BLACK, keylocation);
+ }
+ }
+#endif //RGBLIGHT_ENABLE
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ uint16_t root_note = MIDI_INVALID_NOTE; // Starting value for the root note of each chord
+
+ #ifdef RGBLIGHT_ENABLE
+ // prepare for turning on LEDs when keys are pressed.
+ uint8_t r = record->event.key.row;
+ uint8_t c = record->event.key.col;
+ uint8_t keylocation = convert_key_to_led[MATRIX_COLS*r+c];
+ uint8_t keylocation2 = convert_key_to_led2[MATRIX_COLS*r+c];
+ #endif //RGBLIGHT_ENABLE
+
+ switch (keycode) {
+ // MIDI Chord Keycodes, on the left side.
+ case MI_CH_Cr ... MI_CH_Br: // Root Notes
+ root_note = keycode - MI_CH_Cr + MI_C_1;
+ process_midi(root_note, record);
+ process_midi(root_note - 12, record); // -1 Octave
+ process_midi(root_note + 12, record); // +1 Octave
+ #ifdef RGBLIGHT_ENABLE
+ // if (record->event.pressed) {
+ // rgblight_sethsv_at(HSV_GOLDENROD, keylocation);
+ // }else{
+ // rgblight_sethsv_at(HSV_BLACK, keylocation);
+ // }
+ keylight_manager(record, HSV_GOLDENROD, keylocation);
+ #endif
+ break;
+
+ case MI_CH_C ... MI_CH_B: // Major Chords
+ root_note = keycode - MI_CH_C + MI_C_1;
+ process_midi(root_note, record);
+ process_midi(root_note + 4, record); // Major Third Note
+ process_midi(root_note + 7, record); // Fifth Note
+ #ifdef RGBLIGHT_ENABLE
+ keylight_manager(record, HSV_GOLDENROD, keylocation);
+ #endif
+ break;
+
+ case MI_CH_Cm ... MI_CH_Bm: // Minor Chord
+ root_note = keycode - MI_CH_Cm + MI_C_1;
+ process_midi(root_note, record);
+ process_midi(root_note + 3, record); // Minor Third Note
+ process_midi(root_note + 7, record); // Fifth Note
+ #ifdef RGBLIGHT_ENABLE
+ keylight_manager(record, HSV_GOLDENROD, keylocation);
+ #endif
+ break;
+
+ case MI_CH_CDom7 ... MI_CH_BDom7: // Dominant 7th Chord
+ root_note = keycode - MI_CH_CDom7 + MI_C_1;
+ process_midi(root_note, record);
+ process_midi(root_note + 4, record); // Major Third Note
+ process_midi(root_note + 10, record); // Minor Seventh Note
+ #ifdef RGBLIGHT_ENABLE
+ keylight_manager(record, HSV_GOLDENROD, keylocation);
+ #endif
+ break;
+
+ case MI_CH_CDim7 ... MI_CH_BDim7: // Diminished 7th Chord
+ root_note = keycode - MI_CH_CDim7 + MI_C_1; // Changed from "+ MI_C" to "+ MI_C_1" since there is "root_note - 3" below.
+ process_midi(root_note, record);
+ process_midi(root_note + 3, record); // Minor Third Note
+ process_midi(root_note - 3, record); // Diminished 7th Note
+ #ifdef RGBLIGHT_ENABLE
+ keylight_manager(record, HSV_GOLDENROD, keylocation);
+ #endif
+ break;
+
+ // Keycodes on the right side.
+ #ifdef RGBLIGHT_ENABLE
+ case MIDI_TONE_MIN ... MIDI_TONE_MAX: // notes on the right side.
+ keylight_manager(record, HSV_GOLDENROD, keylocation);
+ keylight_manager(record, HSV_GOLDENROD, keylocation2);
+ break;
+
+ case KC_MUTE:
+ if (record->event.pressed) {
+ myMUTEstat = !myMUTEstat;
+ if (myMUTEstat) {
+ rgblight_sethsv_at(HSV_GOLDENROD, keylocation);
+ } else {
+ rgblight_sethsv_at(HSV_BLACK, keylocation);
+ }
+ }
+ break;
+ #endif
+ }
+ return true;
+}
+
+#ifdef ENCODER_ENABLE
+void encoder_update_user(int8_t index, bool clockwise) {
+ if (index == 1) { /* An encoder on the right side */
+ if (clockwise) {
+ tap_code(KC_VOLU);
+ } else {
+ tap_code(KC_VOLD);
+ }
+ }
+}
+#endif // ENCODER_ENABLE
diff --git a/keyboards/3araht/giabalanai/keymaps/default/readme.md b/keyboards/3araht/giabalanai/keymaps/default/readme.md
new file mode 100644
index 000000000000..d929aa1f5e54
--- /dev/null
+++ b/keyboards/3araht/giabalanai/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for giabalanai
diff --git a/keyboards/3araht/giabalanai/readme.md b/keyboards/3araht/giabalanai/readme.md
new file mode 100644
index 000000000000..e0f1a05ecf0e
--- /dev/null
+++ b/keyboards/3araht/giabalanai/readme.md
@@ -0,0 +1,19 @@
+# giabalanai - nobellows -
+
+
+
+*A short description of the keyboard/project*
+
+* Keyboard Maintainer: [3araht](https://github.com/3araht)
+* Hardware Supported: *The PCBs, controllers supported*
+* Hardware Availability: *Links to where you can find this hardware*
+
+Make example for this keyboard (after setting up your build environment):
+
+ make 3araht/giabalanai:default
+
+Flashing example for this keyboard:
+
+ make 3araht/giabalanai:default:avrdude
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/3araht/giabalanai/rules.mk b/keyboards/3araht/giabalanai/rules.mk
new file mode 100644
index 000000000000..8cbe9e11ca19
--- /dev/null
+++ b/keyboards/3araht/giabalanai/rules.mk
@@ -0,0 +1,38 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
+BOOTLOADER = caterina
+
+# Build Options
+# change yes to no to disable
+#
+# BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no # Console for debug
+COMMAND_ENABLE = no # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
+# RGB_MATRIX_ENABLE is not suitable for giabalanai keyboard on the right side (there are dulpicate keys).
+RGB_MATRIX_ENABLE = no # Use RGB matrix (Don't enable this when RGBLIGHT_ENABLE is used.)
+BLUETOOTH_ENABLE = no # Enable Bluetooth
+AUDIO_ENABLE = no # Audio output
+
+MIDI_ENABLE = yes # MIDI support
+
+ENCODER_ENABLE = yes # encoder on mute button
+
+SPLIT_KEYBOARD = yes # Enables split keyboard support