mac

#!/bin/bash

# Welcome to the 18F laptop script!
# Be prepared to turn your laptop (or desktop)
# into an awesome development machine.

fancy_echo() {
  # shellcheck disable=SC2039
  local fmt="$1"; shift

  # shellcheck disable=SC2059
  printf "\n$fmt\n" "$@"
}

append_to_file() {
  # shellcheck disable=SC2039
  local file="$1"
  # shellcheck disable=SC2039
  local text="$2"

  if [ "$file" = "$HOME/.zshrc" ]; then
    if [ -w "$HOME/.zshrc.local" ]; then
      file="$HOME/.zshrc.local"
    else
      file="$HOME/.zshrc"
    fi
  fi

  if ! grep -qs "^$text$" "$file"; then
    printf "\n%s\n" "$text" >> "$file"
  fi
}

append_to_shell_file() {
  append_to_file "$shell_file" "$1"
}

create_and_set_shell_file() {
  shell_file="$1"
  if [ ! -f "$shell_file" ]; then
    touch "$shell_file"
  fi
}

create_zshrc_and_set_it_as_shell_file() {
  create_and_set_shell_file "$HOME/.zshrc"
}

create_fishconfig_and_set_it_as_shell_file() {
  create_and_set_shell_file "$HOME/.config/fish/config.fish"
}

create_bash_profile_and_set_it_as_shell_file() {
  create_and_set_shell_file "$HOME/.bash_profile"
}

# shellcheck disable=SC2154
trap 'ret=$?; test $ret -ne 0 && printf "failed\n\n" >&2; exit $ret' EXIT

set -e

if [ ! -d "$HOME/.bin/" ]; then
  mkdir "$HOME/.bin"
fi

case "$SHELL" in
  */fish) :
    create_fishconfig_and_set_it_as_shell_file
    ;;
  */zsh) :
    create_zshrc_and_set_it_as_shell_file
    ;;
  *)
    create_bash_profile_and_set_it_as_shell_file
    if [ -z "$CI" ]; then
      bold=$(tput bold)
      normal=$(tput sgr0)
      echo "Want to switch your shell from the default ${bold}bash${normal} to ${bold}zsh${normal}?"
      echo "Both work fine for development, and ${bold}zsh${normal} has some extra "
      echo "features for customization and tab completion."
      echo "If you aren't sure or don't care, we recommend ${bold}zsh${normal}."
      echo "Note that you can always switch back to ${bold}bash${normal} if you change your mind."
      echo "Please see the README for instructions."
      echo -n "Press ${bold}y${normal} to switch to zsh, ${bold}n${normal} to keep bash: "
      read -r -n 1 response
      if [ "$response" = "y" ]; then
        create_zshrc_and_set_it_as_shell_file
        if grep "$(command -v zsh)" > /dev/null 2>&1 < /etc/shells; then
          fancy_echo "=== Getting ready to change your shell to zsh. Please enter your password to continue. ==="
          echo "=== Note that there won't be visual feedback when you type your password. Type it slowly and press return. ==="
          echo "=== Press control-c to cancel ==="
          chsh -s "$(command -v zsh)"
        else
          printf "\n\n"
          echo "Can't switch shells automatically in this case.  The path to zsh isn't in"
          echo "the list of allowed shells.  To manually switch to zsh, enter the following"
          echo "two lines into your terminal (in another tab, or when this script is done):"
          echo ""
          echo "sudo echo \"\$(command -v zh)\" >> /etc/shells"
          echo "chsh -s \"\$(command -v zs)\""
          sleep 3
        fi
      else
        fancy_echo "Shell will not be changed."
      fi
    else
      fancy_echo "CI System detected, will not change shells"
    fi
    ;;
esac

brew_is_installed() {
  brew list -1 | grep -Fqx "$1"
}

tap_is_installed() {
  brew tap | grep -Fqx "$1"
}

gem_install_or_update() {
  if gem list "$1" | grep "^$1 ("; then
    fancy_echo "Updating %s ..." "$1"
    gem update "$@"
  else
    fancy_echo "Installing %s ..." "$1"
    gem install "$@"
  fi
}

latest_installed_ruby() {
  find "$HOME/.rubies" -maxdepth 1 -name 'ruby-*' | tail -n1 | grep -E -o '\d+\.\d+\.\d+'
}

switch_to_latest_ruby() {
  # shellcheck disable=SC1091
  . /usr/local/share/chruby/chruby.sh
  chruby "ruby-$(latest_installed_ruby)"
}


laptop_script_url="https://raw.githubusercontent.com/18F/laptop/master/laptop"
case "$SHELL" in
  */fish) :
    append_to_shell_file "alias laptop='bash (curl -s $laptop_script_url|psub)'"
    # shellcheck disable=SC2016
    append_to_shell_file 'set -xg PATH $HOME/.bin $PATH'
    ;;
  *) :
    append_to_shell_file "alias laptop='bash <(curl -s $laptop_script_url)'"
    # shellcheck disable=SC2016
    append_to_shell_file 'export PATH="$HOME/.bin:$PATH"'
    ;;
esac

if ! command -v brew >/dev/null; then
  fancy_echo "Installing Homebrew ..."
  /bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install.sh)"

  case "$SHELL" in
    */fish) :
      # noop, fish ships with /usr/local/bin in a good spot in the path
      ;;
    *) :
      # shellcheck disable=SC2016
      append_to_shell_file 'export PATH="/usr/local/bin:$PATH"'
      ;;
  esac
else
  fancy_echo "Homebrew already installed. Skipping ..."
fi

# Remove brew-cask since it is now installed as part of brew tap caskroom/cask.
# See https://github.com/caskroom/homebrew-cask/releases/tag/v0.60.0
if brew_is_installed 'brew-cask'; then
  brew uninstall --force 'brew-cask'
fi

if tap_is_installed 'caskroom/versions'; then
  brew untap caskroom/versions
fi

fancy_echo "Updating Homebrew..."
brew update

fancy_echo "Verifying the Homebrew installation..."
if brew doctor; then
  fancy_echo "Your Homebrew installation is good to go."
else
  fancy_echo "Your Homebrew installation reported some errors or warnings."
  echo "If the warnings are related to Python, you can ignore them."
  echo "Otherwise, review the Homebrew messages to see if any action is needed."
fi

if brew_is_installed 'cloudfoundry-cli'; then
  brew uninstall --force cloudfoundry-cli
fi

fancy_echo "Installing formulas and casks from the Brewfile ..."
if brew bundle --file="$HOME/Brewfile"; then
  fancy_echo "All formulas and casks were installed successfully."
else
  fancy_echo "Some formulas or casks failed to install."
  echo "This is usually due to one of the Mac apps being already installed,"
  echo "in which case, you can ignore these errors."
fi

case "$SHELL" in
  */fish) :
    mkdir -p "$HOME/.config/fish/functions"
    hub alias fish > "$HOME/.config/fish/functions/git.fish"
    ;;
  *) :
    # shellcheck disable=SC2016
    append_to_shell_file 'eval "$(hub alias -s)"'
    ;;
esac

fancy_echo 'Checking on Node.js installation...'

case "$SHELL" in
  */fish) :
    fancy_echo "We recommend following the steps at https://github.com/FabioAntunes/fish-nvm to install nvm in fish"
    ;;
esac
if ! brew_is_installed "node"; then
  if command -v n > /dev/null; then
    fancy_echo "We recommend using \`nvm\` and not \`n\`."
    fancy_echo "See https://pages.18f.gov/frontend/#install-npm"
  elif ! command -v nvm > /dev/null; then
    fancy_echo 'Installing nvm and lts Node.js and npm...'
    curl -o- https://raw.githubusercontent.com/creationix/nvm/v0.33.0/install.sh | bash
    export NVM_DIR="$HOME/.nvm"
    # shellcheck source=/dev/null
    [ -s "$NVM_DIR/nvm.sh" ] && \. "$NVM_DIR/nvm.sh"
    # nvm is a bash script itself, some commands of which may fail WITHOUT
    # causing the whole operation to fail. To accomdate that, disable exit on
    # any nonzero exit code while nvm runs.
    set +e

    nvm install --lts

    # Turn it back on when nvm is done, since the rest of this script may have
    # been written assuming this behavior.
    set -e
  else
    fancy_echo 'version manager detected.  Skipping...'
  fi
else
  brew bundle --file=- <<EOF
  brew 'node'
EOF
fi

fancy_echo '...Finished Node.js installation checks.'

fancy_echo 'Checking on Python installation...'

if ! brew_is_installed "python3"; then
  brew bundle --file=- <<EOF
  brew 'zlib'
  brew 'pyenv'
  brew 'pyenv-virtualenv'
  brew 'pyenv-virtualenvwrapper'
EOF
  case "$SHELL" in
    */fish) :
      append_to_shell_file "status --is-interactive; and source (pyenv init -|psub)"
      append_to_shell_file "status --is-interactive; and source (pyenv virtualenv-init -|psub)"
      ;;
    *) :
      # shellcheck disable=SC2016
      append_to_shell_file 'if which pyenv > /dev/null; then eval "$(pyenv init -)"; fi'
      # shellcheck disable=SC2016
      append_to_shell_file 'if which pyenv-virtualenv-init > /dev/null; then eval "$(pyenv virtualenv-init -)"; fi'
  esac

  # pyenv currently doesn't have a convenience version to use, e.g., "latest",
  # so we check for the latest version against Homebrew instead.
  latest_python_3="$(brew info python3 | grep -E -o "3\.\d+\.\d+" | head -1)"

  if ! pyenv versions | ag "$latest_python_3" > /dev/null; then
    # Starting with macOS 10.14 (Mojave), the header files for system libraries
    # have been moved. Rather than hack the header paths based on OS version,
    # just install zlib with brew and build against that directly for now.
    brew install zlib
    export LDFLAGS="-L/usr/local/opt/zlib/lib"
    export CPPFLAGS="-I/usr/local/opt/zlib/include"
    pyenv install "$latest_python_3"
    pyenv global "$latest_python_3"
    pyenv rehash
  fi
else
  brew bundle --file=- <<EOF
  brew 'python3'
EOF
fi

if ! brew_is_installed "pyenv-virtualenvwrapper"; then
  if ! pip3 list | ag "virtualenvwrapper" > /dev/null; then
    case "$SHELL" in
      */fish) :
        fancy_echo "virtualenvwrapper is not compatible with fish"
        ;;
      *) :
        fancy_echo 'Installing virtualenvwrapper...'
        pip3 install virtualenvwrapper
        append_to_shell_file 'export VIRTUALENVWRAPPER_PYTHON=/usr/local/bin/python3'
        append_to_shell_file 'export VIRTUALENVWRAPPER_VIRTUALENV=/usr/local/bin/virtualenv'
        append_to_shell_file 'source /usr/local/bin/virtualenvwrapper.sh'
        ;;
    esac
  fi
fi

fancy_echo '...Finished Python installation checks.'


fancy_echo 'Checking on Ruby installation...'

append_to_file "$HOME/.gemrc" 'gem: --no-document'

case "$SHELL" in
  */fish) :
    fancy_echo "We recommend following the steps at https://github.com/JeanMertz/chruby-fish to install chruby in fish"
    ;;

  # For all other shells, install chruby as long as rbenv is not installed
  *) :
    if command -v rbenv >/dev/null || command -v rvm >/dev/null; then
      fancy_echo 'We recommend chruby and ruby-install over RVM or rbenv'
    else
      if ! brew_is_installed "chruby"; then
        fancy_echo 'Installing chruby, ruby-install, and the latest Ruby...'

        brew bundle --file=- <<EOF
        brew 'chruby'
        brew 'ruby-install'
EOF

        append_to_shell_file 'source /usr/local/share/chruby/chruby.sh'
        append_to_shell_file 'source /usr/local/share/chruby/auto.sh'

        ruby-install ruby

        append_to_shell_file "chruby ruby-$(latest_installed_ruby)"

        switch_to_latest_ruby
      else
        brew bundle --file=- <<EOF
        brew 'chruby'
        brew 'ruby-install'
EOF
        fancy_echo 'Checking if a newer version of Ruby is available...'
        switch_to_latest_ruby

        ruby-install --latest > /dev/null
        latest_stable_ruby="$(cat < "$HOME/.cache/ruby-install/ruby/stable.txt" | tail -n1)"

        if ! [ "$latest_stable_ruby" = "$(latest_installed_ruby)" ]; then
          fancy_echo "Installing latest stable Ruby version: $latest_stable_ruby"
          ruby-install ruby
        else
          fancy_echo 'You have the latest version of Ruby'
        fi
      fi
    fi
esac

fancy_echo 'Updating Rubygems...'
gem update --system

gem_install_or_update 'bundler'

fancy_echo "Configuring Bundler ..."
number_of_cores=$(sysctl -n hw.ncpu)
bundle config --global jobs $((number_of_cores - 1))

fancy_echo '...Finished Ruby installation checks.'

curl -s https://raw.githubusercontent.com/18F/laptop/master/seekrets-install | sh -

if [ -f "$HOME/.laptop.local" ]; then
  # shellcheck source=/dev/null
  . "$HOME/.laptop.local"
fi

fancy_echo 'All done!'